Detailed instructions for use are in the User's Guide.
[. . . ] PJD5133/PJD5233/PJD5523w DLP Projector
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www. "Antes de operar su equipo lea cu idadosamente las instrucciones en este manual"
Compliance Information
FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] See "Connecting Video source devices" on page 17 for
18
details.
Connecting a composite Video source device
Examine your Video source device to determine if it has a set of unused composite Video output sockets available: If so, you can continue with this procedure. If not, you will need to reassess which method you can use to connect to the device. Take a Video cable and connect one end to the composite Video output socket of the Video source device. Connect the other end of the Video cable to the VIDEO socket on the projector. Important If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. You need only connect to this device using a composite Video connection if Component Video and S-Video inputs are unavailable for use. See "Connecting Video source devices" on page 17 for details.
19
Operation
Powering On/Off the Projector
Powering On the Projector:
1. Complete the AC power cord and peripheral signal cable(s) connections. If you are connecting multiple sources to the projector simultaneously, press SOURCE on the projector or Source on the remote control to select your desired signal or press your desired signal key on the remote control. When green mode is turned off, the Power LED begins flashing and the projector has entered stand-by mode. When green mode is turned on, the Power LED becomes steady light and the projector has entered stand-by mode. If you want to turn the projector back on, you must wait until the projector has completed the cooling cycle and has entered stand-by mode. Disconnect the AC power cord from the electrical outlet and the projector. Do not turn on the projector right after power off.
Powering Off the Projector:
1. 4.
20
Adjusting the Projector Height
Elevator foot
The projector is equipped with an elevator foot to adjust the image height. To raise or lower the image, turn the elevator foot to fine-tune the height.
To avoid damaging the projector, make sure that the elevator foot is fully retracted before placing the projector in its carrying case.
Adjusting the Projector Zoom and Focus
Zoom ring Focus ring
1. Adjust the image size by rotating the zoom ring.
21
Adjusting Projection Image Size
Refer to the graphic and table below to determine the screen size and projection distance.
Maximum zoom
Minimum zoom Screen Center of lens
Vertical offset
Projection distance
PJD5133/PJD5233
Screen size Diagonal [inch (cm)]
30 (76) 60 (152) 80 (203) 100 (254) 150 (381) 200 (508) 250 (635) 300 (762)
4 : 3 Screen Projection distance [inch (m)] (min. zoom)
45. 3 (1. 2) 92. 2 (2. 3) 123. 5 (3. 1) 154. 8 (3. 9) 233. 0 (5. 9) 311. 2 (7. 9) 389. 4 (9. 9) 467. 6 (11. 9)
(max. zoom)
50. 6 (1. 3) 102. 9 (2. 6) 137. 7 (3. 5) 172. 5 (4. 4) 259. 6 (6. 6) 346. 7 (8. 8) 433. 8 (11. 0) -
Image height [inch (cm)]
18 (45. 72) 36 (91. 44) 48 (121. 92) 60 (152. 4) 90 (228. 6) 120 (304. 8) 150 (381. 0) 180 (457. 2)
Vertical offset [inch (cm)]
2. 70 (6. 86) 5. 40 (13. 72) 7. 20 (18. 29) 9. 00 (22. 86) 13. 50 (34. 29) 18. 00 (45. 72) 22. 50 (57. 15) 27. 00 (68. 58)
22
PJD5523w
Screen size Diagonal [inch (cm)]
45 (114) 60 (152) 80 (203) 100 (254) 150 (381) 200 (508) 250 (635) 300 (762)
16 : 10 Screen Projection distance [inch (m)] (min. zoom)
55. 4 (1. 4) 74. 5 (2. 0) 100. 0 (2. 5) 125. 5 (3. 2) 189. 2 (4. 8) 253. 0 (6. 4) 316. 7 (8. 0) 380. 4 (9. 7)
(max. zoom)
69. 3 (1. 8) 92. 9 (2. 4) 124. 4 (3. 2) 155. 8 (4. 0) 234. 6 (6. 0) 313. 3 (8. 0) 392. 0 (10. 0) -
Image height [inch (cm)]
23. 85 (60. 58) 31. 8 (80. 77) 42. 4 (107. 70) 53 (134. 62) 79. 5 (201. 93) 106 (269. 24) 132. 5 (336. 55) 159 (403. 86)
Vertical offset [inch (cm)]
2. 96 (7. 51) 3. 94 (10. 02) 5. 26 (13. 35) 6. 57 (16. 69) 9. 86 (25. 04) 13. 14 (33. 39) 16. 43 (41. 73) 19. 72 (50. 08)
Position the projector in a horizontal position; other positions can cause heat build-up and damage to the projector. Smoke residue may buildup on critical parts and damage the projector or its performance Consult with your dealer for special installation such as suspending from a ceiling.
23
Locking control keys
With the control keys on the projector locked, you can prevent your projector settings from being changed accidentally (by children, for example). [. . . ] Move the remote control so it is more directly in front of the projector and not as far to the side.
41
RS-232 Command and Configuration
Function Power Source input Action Power on Power off Computer1 Computer2 S-Video Video HDMI Front table Rear table Front ceiling Rear ceiling Menu Up Down Left Right ECO on ECO off Using hours High Attitude on High Attitude off Keystone up Keystone down 4:3 16:9 16:10 Blank on Blank off Freeze on Freeze off Volume + Volume Mute on Mute off Auto source on Auto source off Control Code BE, EF, 10, 05, 00, C6, FF, 11, 11, 01, 00, 01, 00 BE, EF, 03, 06, 00, DC, DB, 69, 00, 00, 00, 00, 00 BE, EF, 03, 19, 00, 19, 29, 01, 47, 02, CC, CC, 00 BE, EF, 03, 19, 1E, 90, 72, 01, 47, 02, CC, CC, 00 BE, EF, 03, 19, 00, E8, 69, 01, 47, 02, CC, CC, 00 BE, EF, 03, 19, 00, 78, A8, 01, 47, 02, CC, CC, 00 BE, EF, 03, 19, 00, DA, 2B, 01, 47, 02, CC, CC, 00 BE, EF, 10, 07, 9F, 9D, 0E, 0A, EF, 00, 00, 00, 00 BE, EF, 10, 07, 9F, 9D, 0E, 0A, EF, 01, 00, 00, 01 BE, EF, 10, 07, 9F, 9D, 0E, 0A, EF, 02, 00, 00, 02 BE, EF, 10, 07, 9F, 9D, 0E, 0A, EF, 03, 00, 00, 03 BE, EF, 02, 06, 00, E9, D3, 30, 00, 00, 00, 00, 00 BE, EF, 02, 06, 00, 6D, D2, 34, 00, 00, 00, 00, 00 BE, EF, 02, 06, 00, 0B, D2, 32, 00, 00, 00, 00, 00 BE, EF, 02, 06, 00, DA, D3, 33, 00, 00, 00, 00, 00 BE, EF, 02, 06, 00, 38, D2, 31, 00, 00, 00, 00, 00 BE, EF, 03, 06, 00, EF, DB, 6A, 00, 00, 00, 00, 00 BE, EF, 03, 06, 00, 3E, DA, 6B, 00, 00, 00, 00, 00 BE, EF, 03, 06, 00, BA, DB, 6F, 00, 00, 00, 00, 00 BE, EF, 02, 06, 00, 40, D3, 80, 00, 00, 00, 00, 01 BE, EF, 02, 06, 00, 40, D3, 80, 00, 00, 00, 00, 00 BE, EF, 03, 06, 00, 10, DB, 65, 00, 00, 00, 00, 00 BE, EF, 03, 06, 00, 23, DB, 66, 00, 00, 00, 00, 00 BE, EF, 03, 06, 00, 0D, DA, 68, 00, 01, 00, 00, 01 BE, EF, 03, 06, 00, 0D, DA, 68, 00, 02, 00, 00, 02 BE, EF, 03, 06, 00, 0D, DA, 68, 00, 03, 00, 00, 03 BE, EF, 02, 06, 00, DF, DF, 66, 00, 01, 00, 00, 01 BE, EF, 02, 06, 00, DF, DF, 66, 00, 02, 00, 00, 02 BE, EF, 02, 06, 00, 02, D0, 2B, 00, 01, 00, 00, 01 BE, EF, 02, 06, 00, 02, D0, 2B, 00, 02, 00, 00, 02 BE, EF, 02, 06, 00, F1, DE, 68, 00, 00, 00, 00, 00 BE, EF, 02, 06, 00, 20, DF, 69, 00, 00, 00, 00, 00 BE, EF, 02, 06, 00, 0E, DE, 67, 00, 01, 00, 00, 01 BE, EF, 02, 06, 00, 0E, DE, 67, 00, 02, 00, 00, 02 BE, EF, 03, 06, 00, 89, DB, 6C, 00, 00, 00, 00, 00 BE, EF, 03, 06, 00, 58, DA, 6D, 00, 00, 00, 00, 00 BE, EF, 02, 06, 00, 86, D1, 2F, 00, 00, 00, 00, 00 Return Code 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 xxxx 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
Projector position
OSD
Lamp
Fan Keystone Aspect ratio
Blank Freeze Volume
Auto source Auto Sync
42
Factory default Firmware version System Status 3D Sync Color mode
BE, EF, 03, 06, 00, 6B, DA, 6E, 00, 00, 00, 00, 00 BE, EF, 03, 06, 00, D5, D9, 70, 00, 00, 00, 00, 00 BE, EF, 03, 06, 00, 04, D8, 71, 00, 00, 00, 00, 00 3D Sync on 3D Sync off Brightest PC Movie ViewMatch White Board Black Board Green Board User 1 User 2 English Nederlands Français Español Italiano BE, EF, 02, 06, 00, 54, EF, 7C, 00, 01, 00, 00, 01 BE, EF, 02, 06, 00, 54, EF, 7C, 00, 00, 00, 00, 00 BE, EF, 03, 06, 00, 38, 5A, 88, 12, 08, 08, 12, 08 BE, EF, 03, 06, 00, 38, 5A, 88, 10, 00, 00, 10, 00 BE, EF, 03, 06, 00, 38, 5A, 88, 13, 01, 01, 13, 01 BE, EF, 03, 06, 00, 38, 5A, 88, 14, 02, 02, 14, 02 BE, EF, 03, 06, 00, 38, 5A, 88, 15, 05, 05, 15, 05 BE, EF, 03, 06, 00, 38, 5A, 88, 16, 06, 06, 16, 06 BE, EF, 03, 06, 00, 38, 5A, 88, 17, 07, 07, 17, 07 BE, EF, 03, 06, 00, 38, 5A, 88, 18, 03, 03, 18, 03 BE, EF, 03, 06, 00, 38, 5A, 88, 19, 04, 04, 19, 04 BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 01, 00, 00, 01 BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 02, 00, 00, 02 BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 03, 00, 00, 03 BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 04, 00, 00, 04 BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 05, 00, 00, 05 BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 06, 00, 00, 06 BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 07, 00, 00, 07 BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 08, 00, 00, 08 BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 09, 00, 00, 09 BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 0A, 00, 00, 0A BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 0B, 00, 00, 0B BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 0C, 00, 00, 0C BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 0D, 00, 00, 0D BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 0E, 00, 00, 0E BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 0F, 00, 00, 0F BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 10, 00, 00, 10 BE, EF, 1A, 0C, 00, 09, 0B, 3A, 00, 11, 00, 00, 11 BE, EF, 02, 06, 00, 22, 55, 76, 00, 00, 00, 00, 01 BE, EF, 02, 06, 00, 22, 55, 76, 00, 00, 00, 00, 00 BE, EF, 02, 06, 00, 40, B5, 86, 00, 00, 00, 00, 01 BE, EF, 02, 06, 00, 40, B5, 86, 00, 00, 00, 00, 00 BE, EF, 02, 06, 00, D3, D1, 2A, 00, 00, 00, 00, 00 BE, EF, 03, 06, 00, EE, DA, 6B, 00, 00, 00, 00, 00
6 PXX379. . . . 03=Power On 00=Off 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
Language
Português
Magnify Green Mode DCR
Deutsch Svenska Türkçe Suomi Polski Magnify Inc Magnify Dec Green Mode On Green Mode Off DCR On DCR Off
43
D-Sub 9 pin
1 2 3 4 5 6 7 8 9 1 CD RXD TXD DTR GND DSR RTS CTS RI C1 1 2 3 4 5 6 7 8 9 SHELL
Wire List
COLOR Black Brown Red Orange Yellow Green Blue Purple White DW C2 1 2 3 4 5 6 7 8 9 SHELL
44
IR Control Code
System Code: 83F4 Format : NEC
87
02
64
65
66
67
84
6B
8D
82
83
8C
81
85
0A
0F
68
88
03
80
6A
89
63
8F
8E
8B
45
Customer Support
For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number.
Country/Region Australia/New Zealand Website www. viewsonic. com. au T = Telephone F = FAX AUS= 1800 880 818 NZ= 0800 008 822 T (Toll-Free)= 1-866463-4775 T (Toll)= 1-424-233-2533 F= 1-909-468-3757 Email service@au. viewsonic. com
Canada
www. viewsonic. com
service. ca@viewsonic. com
Europe Hong Kong India Ireland (Eire) Korea Latin America (Argentina) Latin America (Chile) Latin America (Columbia)
www. viewsoniceurope. com/uk/ www. kr. viewsonic. com www. viewsonic. com/la/ www. viewsonic. com/la/ www. viewsonic. com/la/ www. viewsonic. com/la/
www. viewsoniceurope. com/uk/Support/Calldesk. htm T= 852 3102 2900 T= 1800 11 9999 service@hk. viewsonic. com service@in. viewsonic. com
www. viewsoniceurope. [. . . ]