User manual VISIONEER PATRIOT 480 SCANNER

[. . . ] Visioneer® Patriot 480 Scanner User's Guide for Windows Visioneer Patriot 480 Scanner User's Guide FOR WINDOWS COPYRIGHT INFORMATION Copyright © 2008 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer® brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort® and OmniPage® Pro brand name and logo are registered trademarks of Nuance Communications, Inc. [. . . ] By default, the location of the archived documents is in you Windows user directory My Documents folder under My OneTouch Archive. The files are saved a folder based on your selection for the Storage Layout. For example, if the file type is TIFF, and you select Documents are put into folders by type, the default location of scanned archive documents is at My Documents\My OneTouch Archive\TIFF Documents. 3. 4. If you want to store your archive documents in some other location, click the Browse button to specify the new location. Click OK or Apply. CONFIGURING THE ONETOUCH BUTTONS 57 EDITING OR DELETING SCAN CONFIGURATIONS Note: Your scanner comes with a number of configurations pre-set at the factory. We recommend that you keep those configurations locked and do not edit or delete them. If you do edit or delete them, and want to get the factory pre-sets back again, you will need to uninstall then re-install your scanner driver. Select the Scan Configuration you want to edit or delete. Select the scan configuration to edit or delete. It must be unlocked, as indicated by not having a lock displayed here. 3. You can make changes to a configuration, but for the changes to be saved, the configuration must first be unlocked. The key icon indicates the configuration is unlocked. 5. Edit the settings and click OK. 58 VISIONEER PATRIOT 480 SCANNER USER'S GUIDE CONFIGURE BEFORE SCAN Choosing Configure Before Scan simply opens either the TWAIN or WIA scanning interface when you press or click a button. You can then use the interface to change the Picture Type, Resolution, and other settings. When you scan, the scanned image will still be sent as the file type and to the same Destination Application already selected in the OneTouch Properties window for that button. TO SET CONFIGURE BEFORE SCAN 1. Using the button selection arrows, choose the button that you want to set to configure before scanning. Select the Scan Configuration Configure Before Scan. Click the arrows to select the button. Select Configure Before Scan. Right-click on Configure Before Scan to get the menu, and choose the interface to use for scanning. 4. Right-click on Configure Before Scan and choose an interface to use for configuring before scanning. TWAIN--The TWAIN Interface opens for you to make changes prior to scanning. Please see "Scanning from the TWAIN Interface" on page 87 for detailed instructions about scanning with the TWAIN Interface. CONFIGURING THE ONETOUCH BUTTONS 59 WIA--The Windows Image Acquisition (WIA) Interface opens for you to make changes prior to scanning. Please see "Scanning from the WIA Interface" on page 92 for detailed instructions about scanning with the WIA Interface. Click OK or Apply on the OneTouch Properties window. TO SCAN USING CONFIGURE BEFORE SCAN 1. 5. Choose the scan settings, such Black & White, Grayscale, or Color, Resolution, Brightness and Contrast. Click the Scan button on the TWAIN Interface. ] The scanner starts scanning. [. . . ] After the restart is complete, plug the power cable back in. STATUS LIGHT TROUBLESHOOTING CODES A blue status light indicates the normal state of the scanner. Normal Operation Blinking blue: indicates the scanner is waking up from power saving and preparing to scan. Steady blue: indicates the scanner is ready to scan. Error Codes If your scanner experiences hardware problems, the status light will blink red, and the LED flashes an "E" and the error code number. The LED blinks back and forth between "E" and the error code number. The red light flashes the number of times as the error code. 100 VISIONEER PATRIOT 480 SCANNER USER'S GUIDE The table below describes the error codes. Error Code 0 Problem Description The scanner is not communicating with the computer. The scanner lamp is either turned off or the lamp has not warmed up enough to initiate scanning. [. . . ]