User manual VISONIC CLIP DATASHEET

[. . . ] Menus and Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 A The Settings You Need. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 B. 1 Entering the User Settings Menu & Selecting a Setting Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 B. 2 Returning to the Previous Step or Exiting the USER SETTINGS Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 25 C. 10 Programming Private Phone and SMS Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 C. 11 Enabling / Disabling the Squawk Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The time saved is displayed without the cursor, for example, "08:55 A" followed by the selected time format. You can now select another option in the User Setting menu (see section B. 1 and section B. 2), or quit programming (see section B. 3). 4 5 6 7 D-302757 23 MENUS AND FUNCTIONS C. 7 Setting the Date & Date Format Here you can program or adjust the built-in-calendar to show the correct date in the desired date format. You can select between a "mm/dd/yyyy" and a "dd/mm/yyyy" date format. Carefully read the section titled "Additional Information" according to the indicated references1 etc ­ see table at end of this section. A. DATE & FORMAT Enter the USER SETTINGS menu and select the [DATE & FORMAT] option button to confirm. 2 Click the or button until the display reads the desired date format, for example, "DD/MM/YYYY" and press to confirm. 2. DATE MM/DD/YYYY or DATE DD/MM/YYYY 3. Date:30/12/2007 Use the numerical keypad to enter the correct date, for example, "20. 02. 2008" at the position of the blinking cursor. A "Happy Tune" sounds, the display shows the set date and returns to step 2 and shows the selected date format. 6 DATE 20/02/2008 Return to step 2 Additional Information (section C. 7) 1 2 For detailed instructions on how to select the Setting Options ­ refer to section B. 1 and section B. 2. The display shows the currently selected format (indicated by a symbol), for example, "mm/dd/yyyy". or You can now select either the "mm/dd/yyyy" or "dd/mm/yyyy" date format using the button. 3 The display shows the Date and selected Date Format, for example, "30. 12. 2007", with the cursor blinking on the first digit. 25 3 4 5 6 D-302757 MENUS AND FUNCTIONS C. 10 Programming Private Phone and SMS Reporting The PowerMaster-10 system can be programmed to send various event notification messages such as alarm, arming or trouble events, to 4 private telephone subscribers by audible signal and if a GSM option is installed, also to 4 SMS telephone numbers. These reports can be programmed either instead of or in addition to the reports transmitted to the monitoring company. Further details about the event notification by telephone and by SMS are provided in Chapter 6. You can determine the number of times the private telephone number is dialed and whether a single acknowledge signal will stop the reporting process or an acknowledge signal from each telephone will be required before the current event is considered reported. Here you can program: The specific events you wish the system to report. The 1st, 2nd, 3rd, and 4th private telephone and SMS numbers for reporting alarm and other event messages to private subscribers. Carefully read the section titled "Additional Information" according to the indicated references1 etc ­ see table at end of this section. PRIVATE REPORT Enter the USER SETTINGS menu and select the [PRIVATE REPORT] button to confirm. 1 option and press the The display will read [REPORT TO PRVT] which is the first option used to enable the Private Reporting and to determine which events will be . 2 reported. 2 To enter this option press The display shows the currently selected option. 3 or button until the display reads the event Click the group you wish to be reported, for example, [alarms]. [. . . ] · If you live in an apartment building, make sure that you are familiar wit the building evacuation plan. Tell guests or visitors to your home about your family's fire escape plan. This is especially important when children are permitted to attend "sleepovers" at friends' homes. 42 D-302757 FCC STATEMENT The 915 MHz model of this sensor complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This sensor may not cause harmful interference, and (2) this sensor must accept any interference that may be received, including interference that may cause undesired operation. [. . . ]