User manual WACOM INTUOS 4 FOR WINDOWS AND MACINTOSH

[. . . ] Contents Index 1 User's manual for Windows & Macintosh ® ® Using a pen Customizing your pen Troubleshooting Using a tablet Customizing your tablet Digital inking Using a cordless mouse Customizing your cordless mouse Using the Radial Menu Application-specific settings Contents Index 1 Contents Index 2 Intuos® 4 User's Manual for Windows® & Macintosh® Version 1. 0, Rev G2208 Copyright © Wacom Co. , Ltd. , 2008 All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. [. . . ] (Pressure should change from approximately 0% with no pressure applied to approximately 100% when full pressure is applied. ) For the Airbrush, move the fingerwheel forward ­ the WHEEL value should decrease to a value of approximately 0 when the fingerwheel is all the way forward. Move the fingerwheel backward ­ the WHEEL value should increase to approximately 1000 when the fingerwheel is all the way back. · 4. Test tilt for the x-axis by moving the pen from a vertical position toward the right; the X TILT value should change from approximately 0 to +60. Now move the tool to the left of vertical; the X TILT value should change from approximately 0 to -60. Test tilt for the y-axis by moving the pen from a vertical position toward the bottom of the tablet; the Y TILT value should change from approximately 0 to +60. Now move the tool toward the top of the tablet; the Y TILT value should change from approximately 0 to -60. If you are testing an Art Pen, test pen rotation by holding the pen vertically and twisting it around its axis. When you are done, click on the CLOSE button to exit the dialog box. Contents Index 57 Contents Index 58 TESTING THE TOUCH RING 1. With the DIAGNOSTICS dialog box open, observe the TABLET INFO column as you test the tablet Touch Ring. If you have more than one tablet connected to your system, be sure you have selected the tablet you are testing from the TABLET INFO column. As you touch and move your finger along the Touch Ring, a number will indicate the current finger TOUCH RING position. Press the Touch Ring toggle button to toggle between the four customizable states. Note: If any of the functions are set to SKIP, the corresponding LED will be skipped in the toggle sequence. Important: Remember that some applications can override and control the Touch Ring functions. Consider closing any open applications except the Wacom Tablet control panel when testing the Touch Ring. For details, see using applications integrated for tablet control. TESTING THE EXPRESSKEYS 1. With the DIAGNOSTICS dialog box open, observe the TABLET INFO column as you test each ExpressKey. If more than one tablet is connected to your system, be sure you have selected the tablet you are testing from the TABLET INFO column. Each time you press a key, its number will be displayed next to the LEFT KEYS category. On the tablet itself, verify also that a tablet ExpressKeys icon is visible for each corresponding ExpressKey. Important: Remember that some applications can override and control the ExpressKey functions. Consider closing any open applications except the Wacom Tablet control panel when testing the ExpressKeys. [. . . ] Also, PEN mode allows you to quickly position the screen cursor without having to first find it and then move it across the desktop. A quality of the Intuos4 pen tip and eraser that senses the amount of pressure being applied. This is used to create natural-looking pen, brush, and eraser strokes in applications that are pressure sensitive. The height above the tablet's active area where the Intuos4 tools are detected. [. . . ]