User manual WAVES APA32

[. . . ] Please be sure not to block them and to allow at least 2cm of space for airflow. Do not allow children to use the APA32 without adult supervision. A note to all users: Please provide an earthing (grounding) connection before the APA32 mains power cable is connected to the mains. 1 Package Content Your new APA32 package contains: 1. APA32 Unit 2 Power cables (1 US, 1 Eur) 1 Crossed Ethernet cable (10m) Rack-mount ears & bolts 5. 4 rubber feet CD wallet Registration card This user guide Mounting the APA32 unit Before connecting the APA32, be sure to securely mount it in a standard 19" studio rack-mount away from heat and moisture. [. . . ] If you connect more than one APA32 unit to your host computer, the Ethernet card in your host computer needs to be 1Gbit bandwidth based in order to support the required network communication bandwidth. Important Note: It is possible to connect the APA32 unit(s) to an existing Ethernet switch used to connect your host computer to other network applications. However, due to bandwidth and other network considerations it is highly recommended to separate networks and to connect your APA32 unit(s) to a dedicated Ethernet card. Following this recommendation will ensure fulfilling the maximum power and potential of your APA32 unit(s). *For switch requirements and specifications please check the Waves website. 5 3. Operation Once the APA32 unit is connected to power and to the network, simply press the power button on the front panel to switch the unit on. To switch the APA32 unit off, press and hold the power button on the front panel for approximately 4 seconds. Before switching the APA32 off, make sure that the Waves software is not running on it (as explained in the software manual). 6 4. Troubleshooting Please verify the following points before trying to use the Waves software on the APA32 unit: 1. A crossed network cable is connected between the APA32 and the host computer ­ in the case of connecting a single APA32 directly to the host computer. A standard network cable is connected between the APA32 and an Ethernet switch. The switch is connected with a standard network cable to the host computer ­ in the case of connecting several APA32 units to the host computer. The APA32 is switched on (by pressing the power button at the front) and the power LED is illuminating. In case it is necessary to restart the APA32 unit, this can be done in two ways: 1. Press and hold the power button for a few seconds to switch the unit off, and then press it again to switch the unit on. Insert a small pin into the Reset socket on the unit's front panel and press the reset button to restart the unit. 7 Contact Waves Sales and technical support Before calling Waves for technical support, please first check the Waves website (http://www. waves. com) for technical support issues and the latest information. Contacting the tech-support or the sales department via our website is preferred, and is more efficient in terms of being able to provide you with complete documentation and solutions. Suite 100 Knoxville, TN 37917 Tel: 1-865-909-9200 Fax: 1-865-909-9245 Rest of the world Waves Audio Ltd. Azrieli Center 3 The Triangle Tower, 32nd Floor Tel-Aviv 67023, Israel Tel: 972-3-608-4000 Fax: 972-3-608-4056 http://www. waves. com ©2005, Waves. All features and specifications subject to change without notice. 8 5. Technical Specifications Dimensions: Width: 444mm / 17. 5 inch Height: 44. 5mm / 1. 75 inch Depth: 300mm / 11. 8 inch 1U 19" Standard Rack-mount Weight: 5kg / 11 pounds Power: Input Voltage: 100~127 VAC, 200~240 VAC, Auto Sensing Frequency: 50~60 Hz Input Current: 5. 0 Arms @ 115 VAC, 2. 5 Arms @ 230 VAC Environmental: Operating Temperature: 10~40°C 9 6. [. . . ] WAVES MAKES NO OTHER WARRANTY, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. PURCHASER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT AS SPECIFIED HEREIN. IN NO EVENT WILL WAVES BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY DEFECT IN THE PRODUCT, INCLUDING LOST PROFITS, DAMAGE TO PROPERTY AND, TO THE EXTENT PERMITTED BY LAW, DAMAGE FOR PERSONAL INJURY, EVEN IF WAVES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow the exclusion of implied warranties or limitations on the duration of an implied warranty, so the above limitations may not apply to you. [. . . ]