User manual WHIRLPOOL ACM909NE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL ACM909NE. We hope that this WHIRLPOOL ACM909NE user guide will be useful to you.


WHIRLPOOL ACM909NE : Download the complete user guide (4231 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL ACM909NE (2124 ko)
   WHIRLPOOL ACM909NE (2124 ko)
   WHIRLPOOL ACM909NE (2123 ko)
   WHIRLPOOL ACM909NE (2125 ko)
   WHIRLPOOL ACM909NE (2125 ko)
   WHIRLPOOL ACM909NE (2126 ko)

Manual abstract: user guide WHIRLPOOL ACM909NE

Detailed instructions for use are in the User's Guide.

[. . . ] Do not repair or replace any part of the appliance unless specifically stated in the user manual. - The power cable must be long enough for connecting the appliance, fitted in the cabinet, to the power supply. - For installation to comply with the current safety regulations, an omnipolar switch with minimum contact gap of 3mm is required. - The electrical parts must not be accessible to the user after installation. [. . . ] The power cable must be long enough to allow the hob to be removed from the worktop. Make sure the voltage specified on the dataplate located on the bottom of the appliance is the same as that of the home. WARNING - - Connection to the terminal block For the electrical connection, use an H05RR-F cable as specified in the table below. Wires 230 V ~ + 230-240 V ~ + 230 V 3 ~ + 400 V 3N ~ + 400 V 2N ~ + Number x size 3 x 4 mm 2 400 V 3N ~ 230 V ~ 230-240 V ~ (Australia only) 230 V ~ (UK only) 3 X 4 mm2 (Australia only) 4 x 1. 5 mm2 230 V 230 V 230 V 230 V 5 x 1. 5 mm2 4 x 1. 5 mm2 A B C 400 V 2N ~ 230 V 3 ~ (Belgium only) 400 V 2N ~ (Holland only) 230 V 230 V Important: - Based on the wiring diagram (see figure) either keep or remove the metal jumpers between the screws on the terminal block L1-L2 and N1-N2. - If the cable is provided, see the connection instructions attached to the cable. - Make sure all six screws on the terminal block are tightened after connecting the cables. See the wiring diagram for details (the jumpers can be between L1-L2 and between N1-N2). EN15 230 V 230 V 230 V 230 V 230 V Connect the yellow/green earth wire to the terminal with the symbol . Remove the terminal block cover (A), undoing the screw and inserting the cover in the terminal block hinge (B). Insert the power cable in the cable clamp and connect the wires to the terminal block as indicated in the connection diagram located near it. Close the cover (C) and screw it on the terminal block with the previously removed screw. Each time the power is connected, the hob performs an automatic check for a few seconds. If the hob already has a power cable, follow the instructions attached to the cable. Connect the appliance to the power supply by means of a multipole switch with minimum contact gap of 3mm. INSTRUCTIONS FOR USE Control Panel Description Control panel On/Off Timer Control panel lock A Cooking zone controls and corresponding display On/Off Timer Control panel lock “Flexi cook models” B Automatic function/ Ecobooster function Cooking zone controls and corresponding display Switching the hob ON/OFF To switch the hob on, press the button for approx. All the cooking zones are deactivated If the hob has been in use, the residual heat indicator “H” remains lit until the cooking zones have cooled down. To deactivate the timer, press the “-” button until the display shows “0:0” or hold the button with the clock symbol for at least 3 seconds. The timer display always shows the timer for the selected zone or the shortest timer. To change or switch off the timer, press the zone selection button for the timer in question. Control panel warnings. Residual heat indicator. The hob is fitted with a residual heat indicator for each cooking zone. If the residual heat indicator of a given cooking zone is lit, that zone can be used, for example, to keep a dish warm or to melt butter. If you are using a pot that is not suitable, not correctly positioned or not of the correct dimensions for your induction hob, the message “no pot” will appear in the display (see figure at side). If no pot is detected within 60 seconds, the hob switches off. Special functions Some models have special functions: Fast boil function (Booster) This function, only present on some cooking zones, makes it possible to exploit the hob’s maximum power (for example to bring water to the boil very quickly). To activate the function, press the “+” button until “P” appears on the display. After 10 minutes’ use of the booster function, the appliance automatically sets the zone to level 9. [. . . ] EN19 POWER LEVEL TABLE Power level Type of cooking Level use (indicating cooking experience and habits) Ideal for rapidly increasing the temperature of food to fast boiling in the case of water or rapidly heating cooking liquids Ideal for browning, starting to cook, frying deep frozen products, fast boiling Boost Max. power 8-9 7-8 High power 6-7 4-5 Medium power 3-4 2-3 1-2 Low power 1 OFF Zero power Fast heating Frying - boiling Browning - sautéing - boiling - Ideal for sautéing, maintaining a lively boil, cooking and grilling (for a short period of time, 5-10 minutes) grilling Browning - cooking - stewing - Ideal for sautéing, maintaining a light boil, cooking and grilling (for a medium period of time, 10-20 minutes), preheating accessories sautéing - grilling Cooking - stewing - sautéing Ideal for stewing, maintaining a gentle boil, cooking (for a long period of time). Creaming pasta grilling Cooking - simmering thickening - creaming Ideal for long-cooking recipes (rice, sauces, roasts, fish) with liquids (e. g. water, wines, broth, milk), creaming pasta Ideal for long-cooking recipes (less than a litre in volume: rice, sauces, roasts, fish) with liquids (e. g. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL ACM909NE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL ACM909NE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.