User manual WHIRLPOOL AMD 009 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AMD 009. We hope that this WHIRLPOOL AMD 009 user guide will be useful to you.


WHIRLPOOL AMD 009 INSTRUCTION FOR USE: Download the complete user guide (2821 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AMD 009 MODE D'EMPLOI (2828 ko)
   WHIRLPOOL AMD 009 BEDIENUNGSANLEITUNG (2824 ko)
   WHIRLPOOL AMD 009 INSTRUZIONI PER L'USO (2823 ko)
   WHIRLPOOL AMD 009 LIBRO DE INSTRUCCIONES (2823 ko)

Manual abstract: user guide WHIRLPOOL AMD 009INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] PRECAUTIONS FOR USE Warning: • Make sure to insert the power plug securely. • Do not plug other electric appliances into the same socket or use extension cords. • Turn off the air conditioner and pull out the plug when cleaning the air conditioner. • The rated voltage of this air conditioner is 220240V with a tolerance of ±22V for fluctuation. [. . . ] Incorrect repairs may cause electrocution or fire, so please contact the Whirlpool Authorized Service Center nearest you for professional repairs. The following checks may save your time and costs. Malfunction Air conditioner does not start immediatly after a stop. Cause • To protect the air conditioner when started after a stop, the microcomputer control delays for 3 minutes before allowing the air conditioner to start. The solution is to clean the air filter (see Cleaning and Maintenance). • If there is still any problem, the air conditioner should be cleaned (Please contact the Whirlpool Authorized Service Center). • When the air conditioner is started, or the compressor starts or stops while running, or the air conditioner is stopped, you may hear a gurgling noise that is the refrigerant flowing back and is not a malfunction. • This may occur when the indoor temperature and humidity are high. • After a short time, the fog will disappear as the indoor temperature and humidity decrease. • This is the sound of friction caused by expansion of the front panel or other parts due to the change of temperature • • • • • • • • • • • • Is there a power failure?Are all the doors and windows closed Is the air flow set to "LOW FAN"?The remote control sometimes cannot execute control if the air conditioner is subject to abnormal interference or frequent switch of functions. In cooling mode, water may condense on pipe or pipe joint due to cooling. In cooling mode, water from heat exchanger may leak. You may hear a "gurgling" noise when the air conditioner is on. A thin fog may flow from the outlet when the air conditioner is running in cooling mode. You may hear a slight crack when the air conditioner is started or stopped. Air conditioner does not run. The air conditioner is not cooling (or heating) properly. Remote control cannot execute control. Water leaks from indoor unit. Water leaks from outdoor unit. • • • • • • • • • 35 Malfunction Indoor unit makes noise. Cause • The sound comes from the fan or compressor relay switching over (close/open). • Air conditioner may make noise in defrost mode or when stopped due to inverse flow of refrigerant in the unit. No air blows out of indoor • When the temperature of the indoor heat exchanger is low during unit. heating process, the indoor unit will stop air blowing to prevent blowing of cold air (for 3 minutes). • In heating mode, if the outdoor temperature or humidity is high and the outdoor heat exchanger has more frost, the air conditioner will activate the auto defrost function and the indoor unit will stop air blowing for 6/8~10 minutes. • In dehumidify mode, the fan on the indoor unit may stop to prevent evaporation of condensing water and rise of temperature. [. . . ] For heating and cooling type unit, also use the cable clamp to fasten the signal control cable, then fasten the corresponding connectors. Notes: • Improper line connection may cause failure of some electrical components and parts • When fastening the cable, leave some slack for the cable between the connection point and the fixing point. Connecting diagrams for oudoor and indoor unit AMC 996/998 AMD 009 Handle Handle Blue Black Yellow-Green Brown Blue Black Yellow-Green Brown Cable Clamp Power Connection Cable Cable Clamp Power Connection Cable Power Connection Cable Black Brown Connection block for outdoor Unit Connection block for outdoor Unit 44 Black Blue Blue Brown Yellow-Green Power Connection Cable Yellow-Green Vacuum-pumping and Leakage Inspection 1. Align with the center of the fitting pipe and manually tighten the conical nut sufficiently. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AMD 009




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AMD 009 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.