User manual WHIRLPOOL AMD 060 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AMD 060. We hope that this WHIRLPOOL AMD 060 user guide will be useful to you.


WHIRLPOOL AMD 060 INSTRUCTION FOR USE: Download the complete user guide (1725 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AMD 060 MODE D'EMPLOI (1725 ko)
   WHIRLPOOL AMD 060 GEBRUIKSAANWIJZING (1718 ko)
   WHIRLPOOL AMD 060 BEDIENUNGSANLEITUNG (1719 ko)
   WHIRLPOOL AMD 060 INSTRUZIONI PER L'USO (1722 ko)
   WHIRLPOOL AMD 060 LIBRO DE INSTRUCCIONES (1722 ko)

Manual abstract: user guide WHIRLPOOL AMD 060INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] INSTRUCTIONS FOR USE PORTABLE AIR CONDITIONER WITH GREEN GAS PREPARATION BEFORE USE SAFETY PRECAUTIONS INTRODUCTION IDENTIFICATION OF PARTS REMOTE CONTROL OPERATION INSTRUCTIONS MAINTENANCE TROUBLESHOOTING PROTECTION INSTALLATION INSTRUCTIONS ELECTRICAL CONNECTION This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ] You can adjust the fan direction by pressing the SWING button; press once to start, again to stop. • In dry mode, fan speed is preset by the appliance, so the fan button is not applicable. • In heater mode, and are not applicable. 1 26 Heater mode 1. You can set TIMER ON or TIMER OFF in heating mode. Additional instructions 1. If you select cooling or dry mode while the appliance is in another mode, the compressor will be delay-protected. Do not press any button during the waiting time, or the appliance will re-count the protection time. In Cool or Dry mode the compressor and fan will stop when the room temperature reaches the set temperature. 6th Sense mode Pressing the 6th Sense button enables fuzzy logic function with the unit either on or off. In this mode, temperature and fan speed are set automatically depending on the actual room temperature. Pressing the FAN button in 6th Sense mode when the appliance is in cooling mode will change fan speed in the following sequence: Auto - High - Low. In dry mode, the LCD display will appear as shown in the figure on the right although only Auto-speed will be enabled. Operation mode and temperature are determined by indoor temperature Indoor temperature 23°C or below Over 23 Operation mode DRY COOLING Target temperature Room temperature decreases 1. 5°C after operating for 3 minutes 23°C Important: 6th Sense button is ineffective in JET mode. Note: Temperature, airflow and direction are controlled automatically in 6th Sense mode. However, a decrease or increase of up to 2°C can be set with the remote control or control panel if you still feel uncomfortable. A decrease or increase of up to 2°C can be set in 6th Sense mode Your feeling Slightly warmer A decrease up to 2°C can be set Slightly cooler A rise up to 2°C can be set Uncomfortable because of unsuitable air flow volume. Button Adjustment procedure Press once to lower the set temp by 1°C Press twice to lower the set temp by 2°C Press once to raise the set temp by 1°C Press twice to raise the set temp by 2°C Indoor fan speed switches from High to Low each time the button is pressed. Jet mode can be set when the appliance is in operation or connected to the power supply. To exit Jet mode, press either the JET, MODE, FAN, ON/OFF or TEMPERATURE SETTING buttons and the display with return to the original mode. Note: • If none of the aforementioned buttons are pressed, the appliance with continue to run in Jet mode at a set temperature of 18°C. • 6th sense button is not available in Jet mode. 28 MAINTENANCE Appliance maintenance Unplug from the power supply Stop the appliance before unplugging. Wipe with a soft, dry cloth Use lukewarm water (below 40°C) to clean the appliance when it is very dirty. Never use volatile substances such as gasoline or polishing powder to clean the unit. Electric shock! Air filter maintenance It is necessary to clean the air filter after approx. Stop the appliance first, then remove the air filter by pulling it upwards. [. . . ] 2 Select the best location • Beside a window, a door or a French window. • Keep the required distance from the return air outlet to the wall and at least 50cm from other obstacles. Installation instructions • • • • • Do not obstruct air outlets or intakes with curtains or other obstructions. The end of the air hose must not be blocked by shutters or other obstructions. When assembly window slider and slider arm and (or) the third piece of the slider, if the window slider is shorter than the width of the window, pull the sliding arm out to the width of the window. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AMD 060




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AMD 060 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.