User manual WHIRLPOOL AWO 3711 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AWO 3711. We hope that this WHIRLPOOL AWO 3711 user guide will be useful to you.


WHIRLPOOL AWO 3711 INSTRUCTION FOR USE: Download the complete user guide (671 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AWO 3711 MODE D'EMPLOI (630 ko)
   WHIRLPOOL AWO 3711 GEBRUIKSAANWIJZING (628 ko)
   WHIRLPOOL AWO 3711 BEDIENUNGSANLEITUNG (698 ko)
   WHIRLPOOL AWO 3711 INSTRUZIONI PER L'USO (632 ko)
   WHIRLPOOL AWO 3711 TABLEAU DE PROGRAMMES (217 ko)
   WHIRLPOOL AWO 3711 PROGRAM CHART (216 ko)

Manual abstract: user guide WHIRLPOOL AWO 3711INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] Worktop Control panel Detergent dispenser Service plate (inside the door) Door Child safety device (if provided, inside the door) Filter (behind cover) Plinth Adjustable feet 1 2 3 4 5 6 7 8 9 DOOR To open the door, hold the door handle, press the inside handle and pull the door. Close the door by pressing it without excessive force until it clicks shut. CHILD SAFETY (IF AVAILABLE) To protect the appliance against improper use, turn the plastic screw on the interior of the door. To do this, use the thick rounded corner of the coloured insert from the detergent dispenser or a coin: • Slot vertical: the door will not lock • Slot horizontal - normal position: the door can be locked again BEFORE THE FIRST WASH CYCLE To remove any residual water used in testing by the manufacturer, we recommend that you carry out a short wash cycle without laundry. Pour a little detergent (about 30 ml) into the detergent compartment 4. [. . . ] Re-insert the filter and screw it in clockwise as far as it will go (handle must be horizontal). Pour about 1 litre of water into the detergent drawer to reactivate the “Eco system”. Clean the internal mesh filter and screw the water inlet hose back onto the tap. Pull off the mesh filter from the washing machine connection with universal pliers and clean it. Turn on the tap and ensure that the connections are completely water-tight. Clean the internal mesh filter and screw the water inlet hose back onto the tap. Turn on the tap and make sure the connections are completely water-tight. 24 Black process 45. 0° 100. 0 LPI 30105536aGB. fm Page 25 Thursday, December 30, 2004 10:53 AM TROUBLESHOOTING GUIDE Depending on the model, your washing machine is equipped with various automatic safety functions. This enables faults to be detected in good time and the safety system can react appropriately. These faults are frequently so minor that they can be removed within a few minutes. Check whether: • the mains plug is inserted into the socket • the wall socket is functioning correctly (use a table lamp or similar appliance to test it) The washing machine will not start. . . Check whether: • the door is properly closed (child safety); • the “Start/Pause” button has been pressed. In models with LCD display, the display shows: Residue from detergent and additives left in the detergent drawer at end of wash. Check whether: • the siphon is correctly installed and clean (see “Care And Maintenance”) • sufficient water is entering. The mesh filters of the water supply could be blocked (see “Care And Maintenance”) • When using powder detergent beforehand the coloured insert for dosing liquid detergent has been removed from the dispenser Machine vibrates during spin cycle. Check whether: • the washing machine is level and standing firmly on all four feet • the transit bolts have been removed. Before using the machine, it is imperative that the transport bolts are removed Final spin results are poor. For models with a “Water tap closed” indicator lamp, the red indicator lamp lights up. The appliance stops during the programme (varies depending on model) Check whether: • the “Rinse Hold” indicator lamp is flashing; terminate this option by pressing the button again In models with LCD display: the “Rinse Hold” option has been preselected and the “Rinse Hold” symbol appears on the display; cancel this option by pressing the “ ” button or select the “Drain” programme • another programme has been selected and the “Start/Pause” indicator lamp is flashing. Reselect the desired programme and press the “Start/Pause” button • the door has been opened and the “Start/Pause” indicator lamp is flashing. In models with LCD display, the display shows: “PAUSE!” • the washing machine's safety system has been activated (see “Fault display chart”) The washing machine has an imbalance detection and correction system. bathrobes), this system may reduce the spin speed automatically or even interrupt the spin completely if it detects too great an imbalance even after several spin starts, in order to protect the washing machine. In models with LCD display, in the event of an imbalance, the display shows: • If the laundry is still too wet at the end of the cycle, add smaller articles of laundry and repeat the spin cycle • Excessive foam formation may prevent spinning. [. . . ] • The service code (number after the word SERVICE). The After Sales Service sticker can be found inside the door. After Sales Service phone numbers and addresses are given on the guarantee card. Alternatively, consult the dealer where you purchased the appliance. TRANSPORT / HANDLING Never lift the appliance by the worktop when transporting. 1. Eliminate all water from the hoses and from the appliance (see “Removing the Filter”, “Draining Residual Water”). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AWO 3711




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AWO 3711 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.