User manual WHIRLPOOL AWOD4939

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AWOD4939. We hope that this WHIRLPOOL AWOD4939 user guide will be useful to you.


WHIRLPOOL AWOD4939 : Download the complete user guide (483 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AWOD4939 (492 ko)
   WHIRLPOOL AWOD4939 (491 ko)
   WHIRLPOOL AWOD4939 (503 ko)
   WHIRLPOOL AWOD4939 (486 ko)
   WHIRLPOOL AWOD4939 (408 ko)

Manual abstract: user guide WHIRLPOOL AWOD4939

Detailed instructions for use are in the User's Guide.

[. . . ] INTENDED USE This washing machine is exclusively destined to wash and spin machine washable laundry in quantities which are usual for private households. • Observe the instructions given in these Instructions for Use and the Programme Chart when using the washing machine • Keep these Instructions for Use and the Programme Chart; if you pass on the washing machine to another person, also give him/her Instructions for Use and Programme Chart. SAFETY AND GENERAL RECOMMENDATIONS 1. Safety instructions • The washing machine is appropriate for indoor use only. • Do not store flammable fluids near the appliance • Children must not be allowed to play with the washing machine or to climb into the drum. • The washing machine can be operated by children from the age of 8 years up, as well as by people with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided they are supervised or instructed regarding the safe use of the washing machine and they understand the dangers resulting from the use. Children must not play with the washing machine. [. . . ] 12, 13 or 14, depending Using starch powder • Select the “Rinse and Spin” programme and check that the spin speed is adjusted to not more than 800 rpm. • Start the programme, pull out the detergent dispenser so that you can see approximately 3 cm of the softener chamber. • Pour the starch solution prepared into the softener chamber while the water is running into the detergent dispenser. on model) Check the inlet hose regularly for brittleness and cracks and replace it if necessary using a new hose of the same type. The inlet hose as shown on picture 13 has a safety valve to prevent the appliance against uncontrolled water inlet; if the safety valve inspection window (A) is red, the safety valve has been activated and the hose must be exchanged. Contact out After-Sales Service or your specialist dealer to obtain a new inlet hose. For unscrewing the inlet hose as shown on picture 13, you must push down the release lever (B - if available) while unscrewing it. 14), periodically check the colour of the transparent coating. Appliance exterior and control panel Appliance interior • Wash down with a soft damp cloth. • After each washing, leave the door open for sometime to allow the inside of the appliance to dry. • If you never or seldom wash your laundry at 95°C, we recommend to occasionally run a 95°C programme without laundry, adding a small amount of detergent, to keep the interior of the appliance clean. GB 4 GB 5 Door seal • Dry the door seal after each washing with an absorbent cotton cloth; make sure that the door seal is completely dry before closing the door of the empty washing machine. • Check the condition of the door seal periodically. Filter • Check and clean the filter regularly, at least two or three times a year (see “Draining Residual Water/ Cleaning The Filter”). Do not use detergents containing solvents, scouring powder, glass or general purpose cleaners, and flammable fluids. They may harm the plastic surfaces or other parts. TROUBLESHOOTING GUIDE Your washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and allow you to react appropriately. These faults are frequently so minor that they can be removed within a few minutes. Problem Appliance does not start, no indicators are on Appliance does not start although “Start(Pause)” has been pressed Causes - Solutions - Tips • Plug is not properly inserted in socket. • Socket or fuse does not function correctly (use a table lamp or similar appliance to test it). • The “Child lock/Lock buttons” feature has been activated (if available on your model). To unlock the buttons, push the two buttons marked with the key symbol simultaneously and hold them at least for 3 seconds. The key symbol on the display disappears and the programme can be started. For draining the water without spinning, select “Drain” programme (if available) or press the “Reset/Drain” button for at least 3 seconds. • Programme has been changed - reselect desired programme and press “Start/Pause”. • Programme has been interrupted and eventually door has been opened - close door and restart programme by pressing “Start(Pause)”. • The appliance’s safety system has been activated (see “Failure indicators” in your programme chart). • Water tap is not opened or water inlet hose is kinked or blocked (“Water tap closed” indicator blinks). [. . . ] • Check the inlet hose regularly for brittleness and cracks and replace if necessary. • The washing machine can be connected without a backflow valve. REMOVE TRANSPORT BOLTS!(pict. 15) Important: -- Not removed transport bolts cause damages to the appliance!-- Keep the transport bolts for further transporting of the appliance; in this case refit the transport bolts in reverse order. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AWOD4939




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AWOD4939 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.