Detailed instructions for use are in the User's Guide.
[. . . ] Interrupting programme: To interrupt a drying cycle, press the “Start (Pause)” button and open the door. Wait at least 5 minutes, to allow the laundry to cool down, before you unload the dryer. For your safety the drying cycle stops automatically if you open the door. To restart, after door opening, close the door and press the “Start (Pause)” button again. [. . . ] Laundry which requires ironing such as: trousers, dresses, skirts, shirts, blouses. Low drying intensity for delicates and items such as: trousers, dresses, shirts, blouses. Cotton or linen hot wash / coloured laundry
X X
X X
X X
X X
X X
X X
X X
X X
210 185
180 160
Cotton
W
Cupboard dry +
Cupboard dry*
Cotton
Max. 9. 0 kg
X
X
X
X
X
X
X
X
160
135
Iron dry
Iron dry*
X
X
X
X
X
X
X
X
130
110
VW
Extra dry
Extra dry
Synthetic, mixed fibre or cotton easy care (ironing not required) laundry
X
X
–
X
X
X
X
X
95
70
Synthetic
Cupboard dry Iron dry
Cupboard dry*
Synthetics
Max. 4. 5 kg
X
X
–
X
X
X
X
X
70
50
Iron dry
X
Laundry made from synthetic fibres such as polyamide, nylon, polyacrylic, etc. 2. 5 kg Cotton – synthetic blend 3. 0 kg Cotton 3. 0 kg Textiles made of silk 2. 5 kg Synthetic 2. 5 kg
X
–
X
X
X
X
X
60
45
Special programmes
V
Delicate Plus
Delicate plus
X
X
–
X
X
X
X
X
85
70
Mixed load
Mixed load
X
X
–
X
X
X
X
X
80
60
Jeans
Jeans
Jeans, working trousers and jackets.
X
X
–
X
X
X
X
X
80
60
Silk
Silk
Blouses, shirts and T-shirts.
X
X
–
X
X
X
X
X
85
70
Sport
Sport
Sport clothes, functional underwear, running tights.
X
X
–
X
X
X
X
X
85
70
Airing
Laundry is aired, refreshed and loosen up for 30 minutes without heating.
All textiles.
Airing Drying time
10’ 20’ 30’ 40’ 50’ 60’ 70’ 80’ 90’ 100’ 110’ 120’
–
–
–
–
X
X
X
X
30’
–
Drying items
Completes drying (suitable for all fabrics)
X
X
–
X
X
X
X
X
10’ 20’ 30’ 40’ 50’ 60’ 70’ 80’ 90’ 100’ 110’ 120’
*Test programmes according to EN61121, tested with maximum rated load capacity.
2
HOW TO PROCEED IF…
. . . you want to check the dryer yourself first: (If your machine is not functioning correctly, please check the following points before calling the customer service – also refer to relevant chapter in the Instructions for use)
Drying takes too long / Laundry is not dry enough
Has the correct drying programme been selected? Has the cycle been interrupted (door opening, full water container)? Was the inserted laundry too wet (washing machine spin speed less than 1000 rpm)? Is the heat exchanger dirty (for more information, refer to the Instructions for use)? Is the “End” and “Anticrease” indicator lamp lighting up? If the drying result does not meet your expectation, select a more dry programme or use the dryness adjustment option (if available) to optimize the drying result. Is the plug properly inserted into the mains electricity socket? Have all lint on the heat exchanger seal and the door seal been wiped away? Is the dryer leveled?
The dryer does not operate (after a power failure, always press the “Start (Pause)” button)
Filter, water container indicator lamp on
Water droplets underneath the dryer
. . . you want to care of and clean your dryer:
Clean the filter at the end of every cycle
Brush lint using a soft brush or your fingertips. Replace the water container when empty by pushing it completely back into place. Clean the heat exchanger housing (for further information see chapter “Cleaning the heat exchanger” in the Instructions for use).
Empty the water container at the end of every drying cycle
Clean the heat exchanger at least once a month
3
FAILURE CODES
In case of a malfunction of the dryer, one the following failure codes could be displayed. Depending on the model of your dryer, the failure can be displayed in letters or by different blinking lamps. Failure code Lamps failure code Check needed by customer before Service call
F01
Please call the After-Sales-Service.
F02
Please call the After-Sales-Service.
F03
Please call the After-Sales-Service.
F04
Please call the After-Sales-Service.
F05 Turn OFF the dryer. Unplug the dryer. If the failure occurs again, please call the After-Sales-Service.
F06
F07
F10 – F22
Turn OFF the dryer. Assure that the door is correctly closed and heat exchanger correctly positioned.
Start lamp is blinking 2 times per second when it is pressed
Bottom filter lamp is blinking or Door filter lamp is blinking 2 times per second when the Start button is pressed
Assure that the heat exchanger is correctly positioned.
4
Before using the machine, please also read the instructions for use carefully!
AZB 9780/1 – Quick Reference Guide
Indicator lamps and Options
Programme selector knob
The drying programme is selected by turning this knob. [. . . ] To deactivate this option, press the button until the “key” symbol disappears. The key lock function is still active even when the selector knob is turned to “off” position or the door is opened. The function has to be deactivated.
Sometimes the programme may finish
before the selected “Finish in” time has expired (e. g. In this case, the dryer will tumble the laundry regularly to keep it fresh, until the selected “Finish in” time has expired. [. . . ]