User manual WHIRLPOOL GMI 50102 IN INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL GMI 50102 IN. We hope that this WHIRLPOOL GMI 50102 IN user guide will be useful to you.


WHIRLPOOL GMI 50102 IN INSTRUCTION FOR USE: Download the complete user guide (2066 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL GMI 50102 IN KURZANLEITUNG (6194 ko)
   WHIRLPOOL GMI 50102 IN PROGRAM CHART (6194 ko)
   WHIRLPOOL GMI 50102 IN PRODUKTDATENBLATT (56 ko)
   WHIRLPOOL GMI 50102 IN PRODUCT FICHE (52 ko)
   WHIRLPOOL GMI 50102 IN PROGRAM CHART (6194 ko)
   WHIRLPOOL GMI 50102 IN KURZANLEITUNG (6194 ko)

Manual abstract: user guide WHIRLPOOL GMI 50102 ININSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] €¢ The inlet water temperature varies according to the model installed. €¢ When installing the appliance, make sure the drain water discharges correctly (if necessary, remove the wire gauze from the sink siphon). Only for appliances equipped with water stop system: if the connection instructions are followed correctly, the water stop system is able to prevent water leaking from the appliance and damaging your home. Electrical connection: • All local electricity board regulations must be complied with. [. . . ] €¢ In the event of a fault, switch off the appliance and turn off the water tap. €¢ On completion of the programme, switch off the dishwasher and turn off the water tap. €¢ Repairs and technical modifications must be carried out exclusively by a qualified technician. €¢ The water in the dishwasher is not suitable for drinking. Protection against freezing If the appliance is placed in an area where there is a risk of freezing, it must be drained completely. Turn off the water tap, disconnect the flexible inlet and outlet hoses, and let all the water run out. Only for appliances equipped with the water stop system: The water inlet hose and the plastic box contain electrical components. The appliance must only be used at temperatures between 5°C and 45°C. This appliance is marked according to the European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). You can help prevent potentially harmful consequences for the environment and health by ensuring that this appliance is disposed of appropriately. The symbol on the appliance, or on documentation enclosed with the appliance, indicates that this product must not be treated as household waste, but must be delivered to the nearest collection centre for the recycling of electrical and electronic appliances. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For further information on the treatment, recovery and recycling of this appliance, contact your competent local authority, the collection service for household waste or the shop where you purchased the appliance. 11 HOW TO FILL THE SALT CONTAINER If the water hardness level is 1-2 (medium) or higher, before using the dishwasher, fill the salt container with regeneration salt (to find out the hardness level of water in your area, contact your local water supplier or check the last bill you received). The dishwasher is equipped with an electronic control system that allows the user to set the water softener in accordance with the hardness level of the water supply. To set the water softener, proceed as follows: If the water hardness level does not correspond to position h3 on the selector (factory setting) or if the water hardness level changes: Setting the water softener The dishwasher is equipped with a device that allows the user to set the water softener in accordance with the hardness level of the water supply. The water hardness level is selected using the PROGRAMME SELECTION BUTTON. To set the water hardness, hold the button pressed for more than 15 seconds. The WATER HARDNESS INDICATOR will flash while the water hardness setting is indicated on the SELECTED PROGRAMME INIDICATOR LIGHTS. Single presses of the button will alter the hardness setting in accordance with the following table: Water hardness 1 soft 1 - 2 medium 2 medium 3 medium-hard 4 hard 5 extremely hard German degrees °dH 0-4 5 - 15 16 - 23 24 - 31 32 - 47 48 - 58 French degrees °fH 0-7 8 - 25 26 - 40 41 - 60 61 - 80 81 - 100 mmol/l 0 - 0. 3 52 - 64 Setting All indicator lights off (no salt) One indicator light on Two indicator lights on Three indicator lights on Four indicator lights on Five indicator lights on END END END END END END How to fill the salt container Warning: only use regeneration salt for use in domestic dishwashers!Do not fill the salt container with unsuitable substances, such as detergent, as this will cause irreparable damage to the water softener system. [. . . ] €¢ For programmes with additional “Half load/Multizone” function selected (if available): - When using powder or liquid detergent the dosage can be reduced by 1/3. Detergent Use good quality liquid or powder dishwasher detergents and/or tablets (do not use hand dishwashing detergents). In order to safeguard the environment, follow the manufacturer’s directions for use. If you use detergents in tablet form, follow the manufacturer’s directions for use. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL GMI 50102 IN




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL GMI 50102 IN will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.