User manual WHIRLPOOL GSC309PVS INSTALLATION 4-08

[. . . ] Oven support surface must be solid, level and flush with bottom of cabinet cutout. Floor must be able to support a total weight (microwave and built-in oven) of 238 lbs (108 kg). [. . . ] NOTE: Screws for attaching side trims (after oven is installed in cabinet) are in a screw bag inside the package containing literature. Locate the oven door latches in both corners of the oven door, and rotate the latches forward to the unlocked position. Failure to follow these instructions can result in death, fire, or electrical shock. This oven is manufactured with a neutral (white) power supply wire and a cabinet-connected green (or bare) ground wire twisted together. Feed the flexible conduit from the oven through the opening in the cabinet. Connect the green (or bare) ground wire (H) from the oven cable to the green (or bare) ground wire (in the junction box) using a UL listed wire connector. IMPORTANT: Use the 3-wire cable from home power supply where local codes permit a 3-wire connection. Route the flexible conduit from the oven to the junction box through a UL listed or CSA approved conduit connector. See "Electrical Connection Options Chart" to complete installation for your type of electrical connection. Green (or bare) ground wire (from oven) IMPORTANT: Use the 4-wire cable from home power supply in the U. Where local codes do not allow grounding through neutral, New Branch circuit installations (1996 NEC), mobile homes and recreational vehicles, new construction and in Canada. Connect the 2 white wires (D) and the green (or bare) ground wire (of the oven cable) using a UL listed wire connector. [. . . ] Make sure the oven door is closed and the "ON" light is showing in the display area. If you do not feel heat or an "F" appears in the display, turn off the oven and contact a qualified technician. [. . . ]