User manual WHIRLPOOL GY399LXU DATASHEET

[. . . ] ® 30" Slide-in Electric Range OVERALL DIMENSIONS PRODUCT MODEL NUMBERS GY397LXU GY399LXU Electrical: This range is manufactured with the neutral terminal connected to the cabinet. [. . . ] Formed front-edged countertops: Must have molded edge shaved flat 3/8" (1. 0 cm) from each front corner of opening. Tile countertops may need trim cut back 3/8" (1. 0 cm) from each front corner and/or rounded edge flattened. If countertop opening width is greater than 30" (76. 2 cm), adjust the 3/8" (1. 0 cm) dimension. Oven must be level for satisfactory baking conditions. CABINET OPENING DIMENSIONS Cabinet opening dimensions shown are for: 25" (63. 5 cm) countertop depth, 24" (61. 0 cm) base cabinet depth, 36" (91. 4 cm) countertop height 13" (33. 0 cm) max. cabinet opening width 23-1/4" (59. 1 cm) opening depth 3/8" (9. 5 cm) radius both corners For minimum clearance to the top of the cooktop, see NOTE. * 30" (76. 2 cm) opening width** 30" (76. 2 cm) opening width 3/8" (1. 0 cm) junction box ­ 5. 5" (14 cm min. ) from either cabinet, 10" (25. 4 cm) max. from floor. 30-3/4" (78. 1 cm) Formed or tiled countertop trimmed 1/2" (1. 3 cm) back at front corners of countertop opening. Cabinet door or hinge should not extend into cutout. *NOTE: 24" (61 cm) min. when bottom of wood or metal cabinet is protected by not less than 1/4" (6. 4 mm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0. 015" (0. 4 mm) stainless steel, 0. 024" (0. 6 mm) aluminum or 0. 020" (0. 5 mm) copper. [. . . ] For complete details, see Installation Instructions packed with product. [. . . ]