User manual WHIRLPOOL HBN G770 B INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL HBN G770 B. We hope that this WHIRLPOOL HBN G770 B user guide will be useful to you.


WHIRLPOOL HBN G770 B INSTRUCTION FOR USE: Download the complete user guide (4326 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL HBN G770 B PROGRAMKORT (756 ko)
   WHIRLPOOL HBN G770 B PROGRAMKORT (756 ko)
   WHIRLPOOL HBN G770 B PROGRAM CHART (755 ko)

Manual abstract: user guide WHIRLPOOL HBN G770 BINSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] NUTID HGA3K GB FI SE NO DK FI SE NO DK ENGLISH SE SUOMI SVENSKA NO NORSK DK DANSK FI 4 17 31 44 57 Language, Kieli, Språk Språk, Sprog Country, valtio, Land, Land, Land ENGLISH 4 Safety information Product description Daily use Helpful hints and tips Maintenance and cleaning What to do if Table of contents Your safety and the safety of others are very important. This manual and the appliance itself provide important safety messages, to be read and observed at all times. This is the safety alert symbol, pertaining to safety, which alerts users to potential hazards to themselves and others. All safety messages will follow the safety alert symbol and either the terms: DANGER Indicates a hazardous situation which, if not avoided, will cause serious injury. [. . . ] Technical information for the installer -- This product can be embedded in a worktop 20 to 60 mm thick. -- If there is no oven beneath the hob, insert a separator panel that has a surface at least equal to the opening in the work surface. This panel must be positioned at a maximum distance of 150 mm below the upper surface of the work surface but, in no case less than 20 mm from the bottom of the hob. -- Before installation, make sure that: -- the local gas delivery conditions (nature and pressure) are compatible with the settings of the hob (see the rating plate and injector table); -- the outer surfaces of the furniture or appliances adjacent to the hob are heat Installation resistant according to local regulations; -- This appliance is not connected to a fume exhaust device. It shall be installed in accordance with current installation regulations. Particular attention shall be given to the relevant requirement regarding ventilation. -- Combustion products are discharged outdoors through specific hoods or wall and/or window mounted electrical fans. gas connection This operation must be performed by a qualified technician. The gas supply system must comply with local regulations to the relavant gas standard. -- You can find specific local regulations for some countries in the paragraph -- “Reference to Local Regulations”. If no information concerning your Country is given, please ask details to a qualified technician. ENGLISH 1 1 -- The connection of the hob to the gas pipe network or gas cylinder must be made by means of a rigid copper or steel pipe with fittings complying with local regulations, or by means of a continuous-surface stainless steel hose complying with local regulations. NOTE: when liquid petroleum gas is used (G30/G31), the minimum gas setting screw must be tightened as far as it will go. IMPORTANT: should you experience difficulty in turning the burners knobs, please contact the After Sales Service for the replacement of the burner tap if found to be faulty. -- Using a socket spanner of the appropriate size unscrew the injector (C), unscrew the injector to be replaced. Before installing the hob, remember to affix the gas calibration plate supplied with the injectors in such a way that it covers the existing information relating to gas calibration. C D A B C A D B ENGLISH 13 Adjusting minimum gas setting of taps The adjustment must be performed with the tap in minimum gas setting position (small flame ) . Upon completion of adjustment, reseal the work surface using sealing wax or an equivalent material. REFERENCE TO LOCAL REGULATIONS Ensure that the installation and gas connections are performed by a qualified technician, following the manufacturer’s instructions and in compliance with current local safety regulations. E To ensure that the minimum setting is correctly adjusted, remove the knob (E) and proceed as follows: -- tighten screw to reduce the flame height (-); -- loosen screw to increase the flame height (+). ENGLISH 14 Environmental concerns Packing -- The packing materials are 100% recyclable and marked with the recycling symbol ( ). products This appliance is marked in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). [. . . ] The sales receipt also reports the IKEA name and article number (8 digit code) for each of the appliances you have purchased. For any additional questions not related to After Sales of your appliances please contact your nearest IKEA store call centre. We recommend you read the appliance documentation carefully before contacting us. öppning eller reducerat gasflöde 4 Symboler 1 Löstagbara galler 2 Wok-brännare med trippelring 3 Liten brännare 4 Medelstora brännare 5 Kontrollvred till trippelringsbrännare 6 Kontrollvred till den lilla brännaren 7 Kontrollvred till Halvsnabb brännare Gör så här för att tända brännarna -- Tryck in och håll vredet intryckt, vrid det motsols till bilden med den stora eldslågan . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL HBN G770 B




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL HBN G770 B will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.