User manual WHIRLPOOL LTE5243D DIMENSION GUIDE

[. . . ] ® 24" (61 cm) Electric Washer/Dryer PRODUCT MODEL NUMBER LTE5243D Electrical: A three- or four-wire, single-phase, 120/240-volt, 60-Hz, AC-only electrical supply (or three- or four-wire, 120/208-volt electrical supply, if specified on the serial/rating plate) on a separate 30-amp circuit, fused on both sides of the line must be provided. [. . . ] Closet door with vents C 4" (10. 2 cm) 4" (10. 2 cm) Angled hood style is acceptable. 4" (10. 2 cm) A. Box hood style *Required spacing **Rear clearance may be 0" (0 cm) when house exhaust system is lined up directly with dryer exhaust. 2. 5" (6. 4 cm) DRAIN SYSTEM Standpipe drain system - wall or floor The standpipe drain requires a minimum diameter standpipe of 2" (5 cm). A 2" (5 cm) diameter to 1" (2. 5 cm) diameter standpipe adapter kit is available. The top of the standpipe must be at least 39" (99 cm) high and no higher than 96" (2. 4 m) from the bottom of the washer. The top of the laundry tub must be at least 34" (86. 4 cm) above the floor and no higher than 96" (2. 4 m) from the bottom of the washer. Floor drain system The floor drain system requires a siphon break that may be purchased separately. [. . . ] For complete details, see Installation Instructions packed with product. [. . . ]