User manual WHIRLPOOL W5CE3024XS INSTALLATION GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL W5CE3024XS. We hope that this WHIRLPOOL W5CE3024XS user guide will be useful to you.


WHIRLPOOL W5CE3024XS INSTALLATION GUIDE: Download the complete user guide (454 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL W5CE3024XS (670 ko)
   WHIRLPOOL W5CE3024XS INSTALLING OVEN UNDER COOKTOP (162 ko)
   WHIRLPOOL W5CE3024XS (670 ko)
   WHIRLPOOL W5CE3024XS ENERGY GUIDE (247 ko)
   WHIRLPOOL W5CE3024XS DIMENSION GUIDE (110 ko)
   WHIRLPOOL W5CE3024XS INSTRUCTION SHEET (162 ko)
   WHIRLPOOL W5CE3024XS INSTALLING OVEN UNDER COOKTOP (162 ko)
   WHIRLPOOL W5CE3024XS OVEN AND COOKTOP COMBINATIONS (75 ko)

Manual abstract: user guide WHIRLPOOL W5CE3024XSINSTALLATION GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12. 4 cm) clamping screws (2) ■ ■ The cooktop must be a specified cooktop that is approved to be installed either alone or over an undercounter built-in oven. If you do not find this label, contact your dealer to confirm that your cooktop is approved. Ovens approved for this type of installation will have an approval label located on the top of the oven. [. . . ] 0 cm) depth clearance from the top of the countertop to the top of the drawer (or other obstruction) in base cabinet is required. 3 ■ The cooktop should be connected directly to the junction box through flexible, armored or nonmetallic sheathed, copper cable. The flexible, armored cable extending from the fuse box or circuit breaker box should be connected directly to the junction box. Locate the junction box to allow as much slack as possible between the junction box and the cooktop so that the cooktop can be moved if servicing becomes necessary in the future. A UL listed or CSA approved conduit connector must be provided at each end of the power supply cable (at the cooktop and at the junction box). Connect the aluminum wiring to the added section of copper wire using special connectors and/or tools designed and UL listed for joining copper to aluminum. follow the electrical connector manufacturer's recommended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices. – ■ INSTALLATION INSTRUCTIONS Prepare Cooktop for Installation Install Cooktop Style 1: Cooktop over undercounter built-in oven IMPORTANT: Clamping brackets should not be used. NOTE: Make sure that the front edge of the cooktop is parallel to the front edge of the countertop. If repositioning is needed, lift entire cooktop up from cutout to avoid scratching the countertop. WARNING Excessive Weight Hazard Use two or more people to move and install cooktop. Using 2 or more people, place the cooktop upside down on a covered surface using the foam end posts from the packaging. Remove one strip at a time and apply foam strip adhesive-side down around bottom of the cooktop glass. NOTE: The foam strip helps avoid damage to the underside of the cooktop glass from debris and helps the cooktop sit flat on uneven counters. Determine whether your cabinet construction provides clearance for installing clamping brackets at cooktop base ends. The clamping brackets can be installed before or after the cooktop is placed into the cutout. Using 2 or more people, place the cooktop upside down on a covered surface using the foam end posts from the packaging. Remove the attachment screws for the bracket locations from the bottom of the cooktop base. Select bracket mounting holes that will allow the bracket to extend far enough out from the cooktop for the installation of 2¹⁄₂" (6. [. . . ] 9 cm) A fused disconnect or circuit breaker box 3-Wire Cable from Power Supply to 3-Wire Cable from Cooktop 6 3-Wire Cable from Power Supply to 4-Wire Cable from Cooktop IMPORTANT: Use the 3-wire cable from power supply where local codes permit connecting the frame-ground conductor to the neutral (white) junction box wire: 4-Wire Cable from Power Supply to 3-Wire Cable from Cooktop IMPORTANT: Use the 4-wire cable from power supply where local codes do not permit connecting the frame-ground conductor to the neutral (white) junction box wire: A E B F G H C D I A B E F G C D A. Connect the flexible, cable conduit from the cooktop to the junction box using UL listed or CSA approved conduit connector. Use a mild solution of liquid household cleaner and warm water to clean cooktop before use. For more information, see the “Cooktop Care” section of the Use and Care Guide. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL W5CE3024XS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL W5CE3024XS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.