User manual WHIRLPOOL WAC 7200/1 PRODUCT FICHE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WAC 7200/1. We hope that this WHIRLPOOL WAC 7200/1 user guide will be useful to you.


WHIRLPOOL WAC 7200/1 PRODUCT FICHE: Download the complete user guide (58 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WAC 7200/1 KURZANLEITUNG (912 ko)
   WHIRLPOOL WAC 7200/1 SCHEDA PROGRAMMI (909 ko)
   WHIRLPOOL WAC 7200/1 TABLEAU DE PROGRAMMES (911 ko)
   WHIRLPOOL WAC 7200/1 PROGRAM CHART (932 ko)

Manual abstract: user guide WHIRLPOOL WAC 7200/1PRODUCT FICHE

Detailed instructions for use are in the User's Guide.

[. . . ] • If the appliance was exposed to the cold prior to delivery, keep it at room temperature for a few hours before operating. • Use only new hoses to connect the washing machine to the water supply. • For models with hot fill: the hot water inlet temperature must not exceed 60°C. 5. Drain • Connect the drain hose to the siphon or hook it over the edge of a sink by means of the “U” bend supplied. • If the washing machine is connected to an integrated drainage system, ensure the latter is equipped with a vent to avoid simultaneous loading and draining of water (siphoning effect). 2. Remove the transport bolts • The washing machine is fitted with transport bolts to avoid any possible damage to the interior during transport. [. . . ] can damage your laundry as well as the appliance drum and tub. 3. Fasteners Close zips and fasten buttons or hooks; loose belts or ribbons should be tied together. DETERGENTS AND ADDITIVES Keep detergents and additives in a safe, dry place out of the reach of children!The choice of detergent depends on: • Type of fabric (cottons, easy care/synthetics, delicate items, wool). Please note: Use only specific detergents for washing wool and garments made of microfibres (like sports or swimwear). Remarks: • Any whitish residues on dark fabrics are caused by insoluble compounds used in phosphate-free powder detergents. If this occurs, shake or brush out the fabric or use liquid detergents. • Use only detergents and additives specifically produced for domestic washing machines. • When using descaling agents, dyes or bleaches for the prewash (if available on your model), make sure that they are suitable for use in domestic washing machines. Descalers could contain products which could damage your washing machine. Do not machine wash fabrics that have been treated with solvents or flammable liquids. • Do not use liquid detergent for the main wash when having activated the “prewash” option (if available on your model). • Do not use liquid detergent when activating the “Start Delay” function (if available on your model). Dosage Follow the dosage recommendations on the detergent pack. Refit the siphon in the softener chamber by pushing it down until it stops; then push the dispenser drawer back into the dispenser compartment. A B Water supply hose(s) (picture C, D or E - depending on model) Check regularly for brittleness and cracks. If a supply hose shows a damage, replace it by a new hose of the same type, available through our After-Sales Service or your specialist dealer. If the inlet hose of your washing machine corresponds with the model on picture “D”, periodically check the safety valve inspection window: if it is red, the hose’s waterstop function was triggered, and the hose must be exchanged by a new one from our After-Sales Service or your specialist dealer. For unscrewing the inlet hose as shown on picture “D”, you must push down the release lever while unscrewing it. “E”), periodically check the colour; if it intensifies locally, the hose may have a leak and should be replaced. Contact our After-Sales Service team or specialist dealer to obtain a replacement hose. C D Release lever Cleaning the mesh filter in the water supply hose(s) 1. Clean the internal mesh filter and screw the water inlet hose back onto the tap. Pull off the mesh filter from the washing machine connection with universal pliers and clean it. Turn on the tap and ensure that the connections are completely water-tight. GB 7 Safety valve inspection window E TROUBLESHOOTING GUIDE Your washing machine is equipped with various automatic safety functions. These enable faults to be detected in good time and the safety system can react appropriately. [. . . ] After problem has been removed, push the “Reset” button for at least 3 seconds; afterwards restart the desired programme. If the fault occurs again, contact our After-Sales-Service (see next chapter). “Clean pump” GB 9 Failure indication lights up Indication on display (if available) from “F03” to “F43” (except “F18” and “F24”) “F24” Description Causes Solutions “Electrical module fault” Push the “Reset” button for at least 3 seconds. May appear for very water-soaking laundry, or if you added too much laundry for a programme destined for small loads only. Push the “Reset” button for at least 3 seconds to stop the programme. Select and start “Rinse and Spin” programme to complete the interrupted wash programme properly. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WAC 7200/1




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WAC 7200/1 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.