User manual WHIRLPOOL WED9470WR

[. . . ] For questions about features, operation/performance, parts, accessories, or service, call: 1-800-253-1301 or visit our website at. When calling, please know the purchase date and the complete model and serial number of your appliance. If you need replacement parts If you need to order replacement parts, we recommend that you use only FSP® Factory Specified Parts. These parts will fit right and work right because they are made with the same precision used to build every new WHIRLPOOL® appliance. [. . . ] In these cycles, a small amount of water is sprayed into the dryer drum after several minutes of tumbling with heat. The STEAM Status Light will come on while the water is sprayed into the drum. The heat setting and cycle time are not adjustable for the Quick Refresh Cycle, but can be adjusted for the Enhanced Touch Up Cycle. 100% cotton garments with wrinkle-free finish may yield better results than those without. If selected for other cycles, it will remain "ON" the next time that cycle is selected. On some models, the Damp Dry Signal may be selected to alert you that your clothes are approximately 80% dry. This is useful when you want to remove lightweight items in a mixed load to avoid overdrying or remove partially dry items that may need ironing. the DAMP DRY SIGNAL is useful when drying bedsheets/linens in a mixed load. When the signal goes off, open the door to stop the dryer, rearrange the load inside the dryer, close the door and restart the dryer to finish the drying cycle. You can change Auto Cycles, Timed Cycles, Options, and Modifier, and anytime before pressing Start. NOTE: If you do not press Start within 5 minutes of selecting the cycle, the dryer automatically shuts off. NOTE: When the WRINKLE SHIELDTM feature is selected and the End of Cycle Signal is on, an audible sound will be emitted every 5 minutes until the clothes are removed, or the WRINKLE SHIELDTM feature is finished. You can change an Option or Modifier anytime before the selected Option or Modifier begins. NOTE: If you happen to press Pause/Cancel twice, the program clears and your dryer shuts down. If all your loads on all Auto Dry cycles are consistently not as dry as you would like, you may change the preset Dryness Level settings to increase the dryness. Your Dryness Level settings can be adjusted to adapt to different installations, environmental conditions or personal preference. There are 3 drying settings: 1 (factory preset dryness level), 2 (slightly drier clothes, approximately 15% more drying time), and 3 (much drier clothes, approximately 30% more drying time). The Dryness Level settings cannot be changed while the dryer is running. To select a new drying setting, press the Dryness Level key again until the desired drying setting is shown. NOTE: While cycling through the settings, the current setting will not flash, but the other settings will flash. The drying setting you selected will become your new preset drying setting for all Auto Dry cycles. This feature allows you to lock your settings to avoid unintended use of the dryer. [. . . ] Proof of original purchase date is required to obtain service under this limited warranty. iTEMS EXCLUDED FROM WARRANTY This limited warranty does not cover: 1. Replacement parts or repair labor if this major appliance is used for other than normal, single-family household use or when it is used in a manner that is inconsistent to published user or operator instructions and/or installation instructions. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or repair house fuses, or to correct house wiring or plumbing. [. . . ]