User manual WHIRLPOOL WED9750WW

[. . . ] For questions about features, operation/performance, parts, accessories, or service, call: 1-800-253-1301 or visit our website at. When calling, please know the purchase date and the complete model and serial number of your appliance. Call the Whirlpool Canada LP Customer Interaction Centre toll free: 1-800-807-6777 or visit us at www. If you need replacement parts If you need to order replacement parts, we recommend that you use only FSP® Factory Specified Parts. [. . . ] When the signal goes off, open the door to stop the dryer, rearrange the load inside the dryer, close the door and restart the dryer to finish the drying cycle. Timed Cycles Load Type QUICK REFRESH Helps to smooth out wrinkles and reduce odors from loads consisting of one to four dry items. ENHANCED TOUCH UP Helps to smooth out wrinkles in loads left in the dryer for an extended period. NOTE: When the WRINKLE SHIELDTM feature is selected and the End of Cycle Signal is on, an audible sound will be emitted every 5 minutes until the clothes are removed, or the WRINKLE SHIELDTM feature is finished. *The Enhanced Touch Up Cycle has a minimum dry time of 15 minutes and a maximum dry time of 40 minutes. Only the Medium and High temperature settings can be used for the Enhanced Touch Up Cycle. This feature allows you to lock your settings to avoid unintended use of the dryer. You can also use the Control Lock feature to avoid unintended cycle or option changes during dryer operation. The control is locked when a single beep is heard and the Control Lock status light is on. When the dryer is off, it is not necessary to press the Control On button before activating the Control Lock feature. You can change an Option or Modifier anytime before the selected Option or Modifier begins. NOTE: If you happen to press Pause/Cancel twice, the program clears and your dryer shuts down. If all your loads on all Auto Dry cycles are consistently not as dry as you would like, you may change the preset Dryness Level settings to increase the dryness. Your Dryness Level settings can be adjusted to adapt to different installations, environmental conditions or personal preference. There are 3 drying settings: 1 (factory preset dryness level), 2 (slightly drier clothes, approximately 15% more drying time), and 3 (much drier clothes, approximately 30% more drying time). The Dryness Level settings cannot be changed while the dryer is running. To select a new drying setting, press the Dryness Level key again until the desired drying setting is shown. NOTE: While cycling through the settings, the current setting will not flash, but the other settings will flash. The drying setting you selected will become your new preset drying setting for all Auto Dry cycles. Press and hold the CONTROL LOCK/UNLOCK button for 3 seconds to turn this feature off. NOTE: When the dryer is running and Control Lock is on, the dryer can be stopped by pressing the Pause/Cancel button, but cannot be restarted until the control is unlocked. You can change Auto Cycles, Timed Cycles, Options, and Modifier, and anytime before pressing Start. [. . . ] Proof of original purchase date is required to obtain service under this limited warranty. iTEMS EXCLUDED FROM WARRANTY This limited warranty does not cover: 1. Replacement parts or repair labor if this major appliance is used for other than normal, single-family household use or when it is used in a manner that is inconsistent to published user or operator instructions and/or installation instructions. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or repair house fuses, or to correct house wiring or plumbing. [. . . ]