User manual WHIRLPOOL WET3300SQ INSTALLATION

[. . . ] Exhaust outlet hood must be at least 12" (30. 5 cm) from the ground or any object that may be in the path of the exhaust. [. . . ] Louvered doors with equivalent ventilation openings are acceptable. 6" (15. 2 cm) 3" (7. 6 cm) EXHAUST VENTING Select the route that will provide the straightest and most direct path outdoors. Recommended hood styles B 48 in. 2 (310 cm2) 24 in. 2 (155 cm2) 27" 1" 1" (2. 5 cm) (68. 6 cm) (2. 5 cm) 5"** 1"* 32" (2. 5 cm) (81. 3 cm) (12. 7 cm) 3" (7. 6 cm) A Angled hood style is acceptable. B A. Closet door with vents C A 4" (10. 2 cm) 4" (10. 2 cm) 4" (10. 2 cm) 2. 5" (6. 4 cm) * Required spacing ** Rear clearance may be 1" (2. 5 cm) when house exhaust system is lined up directly with dryer exhaust. A. Floor drain system The floor drain system requires a siphon break that may be purchased separately. The siphon break must be a minimum of 28" (71 cm) from the bottom of the washer. Additional hoses might be needed. Rigid metal Rigid metal Rigid metal NOTE: Side exhaust adds a 90° turn inside the washer/dryer. [. . . ] To determine maximum exhaust length, add one 90turn to the chart. Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. [. . . ]