User manual WHIRLPOOL WFW94HEX DIMENSIONS GUIDE

[. . . ] Front-Loading Automatic Washer PRODUCT MODEL NUMBERS WFW94HEX, WFW95HEX, WFW97HEX Electrical: A 120 volt, 60 Hz. , AC only, 15- or 20-amp, fused electrical supply is required. [. . . ] (864 mm) 3" (76 mm) 48 in. 2 (310 cm2) 41/2" (113 mm) Minimum diameter for a standpipe drain: 2" (51 mm). A 1/4" (6 mm) diameter to 1" (25 mm) diameter Standpipe Adapter Kit is available (Part Number 280130). To order, please see toll-free phone numbers on front page of your Washer User Instructions. Top of standpipe must be at least 30" (762 mm) high; install no higher than 96" (2. 44 m) from bottom of washer. If you must install higher than 96" (2. 44 m), you will need a sump pump system. Wall standpipe drain system 4" (102 mm) 1" (25 mm) 3" (76 mm) 24 in. 2 (155 cm2) 1" (25 mm) Recessed area or closet installation (stacked washer and dryer): 6" (152 mm) Custom cabinet installation: 7" (178 mm) 3" (76 mm) 48 in. 2 (310 cm2) 41/2" (113 mm) 77 /2" (1969 mm) 1 14" (356 mm) Floor drain system 5" (127 mm) 1" (25 mm) 3" (76 mm) 24 in. 2 (155 cm2) 4" (102 mm) 1" (25 mm) 1" (25 mm) 1" (25 mm) Laundry tub drain system Floor drain system requires a Siphon Break Kit (Part Number 285834) and additional drain hose (Part Number 8318155) with a connector kit (Part Number 285835) that may be purchased separately. [. . . ] For complete details, see Installation Instructions packed with product. [. . . ]