User manual WHIRLPOOL WRS322FNAH USE & CARE GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WRS322FNAH. We hope that this WHIRLPOOL WRS322FNAH user guide will be useful to you.


WHIRLPOOL WRS322FNAH USE & CARE GUIDE: Download the complete user guide (636 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WRS322FNAH ENERGY GUIDE (403 ko)
   WHIRLPOOL WRS322FNAH DIMENSION GUIDE (84 ko)
   WHIRLPOOL WRS322FNAH INSTALLATION GUIDE (793 ko)
   WHIRLPOOL WRS322FNAH WARRANTY INFORMATION (135 ko)

Manual abstract: user guide WHIRLPOOL WRS322FNAHUSE & CARE GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] It marks a possible hazard. May 2001 Page 1 WRS322FNAH & FME1204 FOR THE INSTALLER BACK VIEW: AIR COOLED Note: Allow 6" behind and 6" above either unit for air circulation, utility connections, ELECTRICAL INLET WATER INLET 3 " FLARE 8 BACK VIEW: WATER COOLED ELECTRICAL INLET 9. 5" 5. 25" 3" 5. 25" 3" 7. 3" 9. 43" WATER INLET 3 " FLARE 8 DRAIN ¾" FPT 2. 1" 5. 7" Condenser Inlet 3 8" FPT Condenser Drain ½" FPT 2. 9" 3. 4" 4. 9" 7. 46" DRAIN ¾" FPT These models are designed to fit the following Scotsman storage bins: ·SB480 and extensions (with bin top KBT18) ·BH800 using bin top KBT15 (one unit) or KBT25 (two units). WRS322FNAH Dispenser Applications The WRS322FNAH can be placed on and used with certain ice and ice-beverage dispensers. Kits are required for proper operation: ·BH801 using bin top KBT28 ·BH900 with KBT24 (one unit) ·BH900 with KBT25 (two units side by side) SPECIFICATIONS: Ice Machine Dimensions (w/o bin) WxDxH FME1204AS-3B 21" x 24" x 27" FME1204WS-3A same FME1204WS-3B same FME1204AS-32B same FME1204WS-32A same FME1204WS-32A same WRS322FNAHAS-3B same WRS322FNAHWS-3A same WRS322FNAHWS-3B same WRS322FNAHAS-32B same WRS322FNAHWS-32A same WRS322FNAHWS-32B same Model Number ·ID150 use adapter KBT42 and KNUGDIV ·ID200 or ID250, use adapter KBT46 and KDIL-N-ID2 ·Cornelius ED/DF200 beverage dispensers, use KBT46 and KDIL-N-200 ·Cornelius ED/DF250 beverage dispensers, use KBT46 and KDIL-N-250 ·Lancer nugget IBD, use KDIL-N-L & Lancer kit. Basic Electrical Ice Type Condenser Minimum Type Circuit Ampacity 208-230/60/3 FLAKE Air 8. 4 same FLAKE Water 7. 9 same FLAKE Water 7. 9 208-230/60/1 FLAKE Air 11. 3 same FLAKE Water 10. 8 same FLAKE Water 10. 8 208-230/60/3 NUGGET Air 8. 4 same NUGGET Water 7. 9 same NUGGET Water 7. 9 208-230/60/1 NUGGET Air 11. 3 same NUGGET Water 10. 8 same NUGGET Water 10. 8 December 2004 Page 2 Maximum Refrigerant Fuse Size Charge R-404A* 15 30 oz 15 24 oz 15 22 oz 15 30 oz 15 24 oz 15 22 oz 15 30 oz 15 24 oz 15 22 oz 15 30 oz 15 24 oz 15 22 oz * Refrigerant charge change on water cooled. Always check the nameplate for charge data. WRS322FNAH & FME1204 SAMPLE BIN AND MACHINE COMBINATIONS FME1204 ON BH550* WRS322FNAH ON BH800* The Nameplate is located on the back of the machine. FME1204 ON BH900* * Bin Top Kit Required May 2001 Page 3 WRS322FNAH & FME1204 FOR THE INSTALLER Notice: Scotsman Ice Systems are designed and manufactured with the highest regard for safety and performance. Scotsman assumes no liability or responsibility of any kind for products manufactured by Scotsman that have been altered in any way, including the use of any part and/or other components not specifically approved by Scotsman. [. . . ] Drain the reservoir and thoroughly wash the of Scotsman Ice Machine Cleaner with three quarts interior of the reservoir and cover with sanitizer of hot water. Continue ice making for at least 15 minutes, to Cleaner contains acids. Keep out of the reach of children. DO NOT USE any ice produced from the cleaning solution. Add warm water to the ice storage bin and thoroughly wash and rinse all surfaces within the bin. Sanitize the bin interior by thoroughly washing the interior of the bin and bin door with the balance of the sanitizer solution. Slowly pour the cleaning solution into the water reservoir until it is full. As the Ice Machine begins to use water from the reservoir, continue to add more cleaning solution to maintain a full reservoir. After all of the cleaning solution has been added to the reservoir, and the reservoir is nearly empty, switch the master switch to OFF. After draining the reservoir, as in step 6, wash and rinse the water reservoir. May 2001 Page 16 WRS322FNAH & FME1204 SENSOR MAINTENANCE 1. The bin control uses devices that sense light, therefore they must be kept clean enough so that they can "see". At least twice a year, remove the bin control sensors from the base of the ice chute, and wipe the inside clean, as illustrated. Ice Level Sensors: Slide To Remove 2. Circuit board has shut ice machine down due to high auger motor amp draw. Check for cause of high amp draw, including bearings, gearmotor condition and scale on auger and in evaporator. Auger not turning due to: motor failure; auger relay failure on circuit board; or gears stripped. Fan motor failure (a/c) or water shut off (w/c) Check harness Circuit Board gear motor relay will not Check, replace board close Water level or ice level sensor failed. No ice, auger motor is turning Compressor contactor coil is open Compressor will not start Check, replace sensor Check/replace contactor Check start capacitor. Check start relay Check compressor windings Circuit board compressor relay will not close. Check, replace board Low pressure control open May 2001 Page 21 WRS322FNAH & FME1204 SERVICE DIAGNOSIS Symptom Water Leak Possible Cause Drain plugged up Tubing cracked Condensation on drain tubing Hose off Reservoir cover off Reservoir cracked Evaporator water seal leaks Probable Correction Clean out drain Replace tubing Insulate tubing Reattach hose Return cover to reservoir Replace reservoir Check base of evaporator & drip pan. If the seal leaks, shut off the water, remove the auger, replace the water seal. Check gear motor for water infiltration. Excessive water use Water cooled model, water regulating Adjust to 245 PSIG discharge valve not adjusted properly. pressure Reservoir float valve leaks thru Water cooled model, overcharged with refrigerant Water cooled model, condenser coated with minerals Replace float valve or seat Recover and weigh refrigerant. Adjust or replace Clean with Scotsman Ice Machine Cleaner Oil or replace motor Excessive ice meltage Bin drain clogged Improper installation of drains, they are connected. [. . . ] Reassemble and bench test the gear motor, check for oil leaks, noise, and amp draw. Electrical shock hazard. Disconnect power before beginning to service components. To Check the Motor: 1. If there is continuity but the motor will not start, check the motor's start switch. With ohmmeter wires attached to 1 and 2 move centrifugal switch actuator up and down to simulate motor rotation. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WRS322FNAH




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WRS322FNAH will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.