User manual WHISTLER 1670

[. . . ] OWNER'S MANUAL 1670 LASER/RADAR DETECTOR TM If you have questions concerning the operation of this Whistler product please call consumer relations: 1-800-531-0004 Hours: Monday - Friday 8:00 am - 5:00 pm CST Please keep the receipt in a safe place. If the unit is returned without a dated proof of purchase an out of warranty service charge applies. The warranty is validated only by return of the Warranty Validation card. Now is the time to record the serial number of the unit in the space provided in the warranty section of the manual. INTRODUCTION Dear Whistler Owner, For many of us, a vehicle is more than just transportation. [. . . ] · Press and hold (Power) for 2 seconds to reduce illumination to a Dim setting. Display reads: DIM · Pressing and holding for 2 seconds a second time engages Dark Mode. In Dark Mode, the display goes dark for as long as a signal is being detected and for 20 seconds after, then the display returns to the dimmer setting. · Pressing and holding a third time restores full illumination to the display. Engaging/Disengaging VG-2 See option select mode to turn this feature on. 13 OPERATION Stay Alert Feature The Stay Alert Feature is designed to test a driver's alertness. To engage (when unit is not alarming): · Press and hold City for 2 seconds. Display reads: RU ALERT Within 30-60 seconds two beeps are sounded; to show alertness, the driver must press either the (Volume), City or (Quiet) button within 3-5 seconds. Display reads: PLAY RECORD MEMO 16 OPERATION · Press and release the (Quiet/Record) button to begin a recording. Display reads: REC1 8 REC = record, 1 = track #, 8 = time remaining If the recording time expires for a track, the unit will automatically switch to the next track. To play a message: · Enter Memo mode and press (Power/Play) to listen to recorded messages. · To play a selected track, press (Volume Up) or (Volume Down) button until selected track appears on the display. Display reads: PLY1 8 PLY = play, 1 = track #, 8 = time remaining · Press the (Power/Play) button. Messages are kept in memory and are not affected by resetting the factory features. To delete a message: · Enter Memo mode and press (Volume Up) or (Volume Down) button until selected track appears on the display. · Press the (Quiet/Record) button twice. 17 OPERATION To exit Memo mode: · Press (Volume Up) or (Volume Down) buttons simultaneously and release. NOTE: Memo mode automatically exits within 20 seconds if a button is not pressed. Vehicle Battery Saver Mode The Vehicle Battery Saver Mode automatically shuts off your detector within 3 hours if you forget to turn it off. The timer is reset if the detector is turned off, unplugged or any button is pressed before the 3 hours have expired. The detector will alert you with an audible and visual warning before it shuts off. Display reads: PWR OFF During this warning you can momentarily reset the unit by pressing any button. If the unit has automatically turned itself off, press the (Power/Play) button to turn the unit back on. You can manually engage the Vehicle Battery Saver Mode by pressing and holding the City button until one beep is heard. [. . . ] 72756 28 WARRANTY INFORMATION IMPORTANT: Whistler will not assume responsibility for loss or damage incurred in shipping. Therefore, please ship your unit insured with return receipt requested. Include with your unit the following information, clearly printed: · Your name and street address (for shipping via UPS), and a daytime telephone number. · A detailed description of the problem (e. g. , "Unit per forms self-test but does not respond to radar"). [. . . ]