User manual WHISTLER 1750 COMBO

[. . . ] 1750/1760/1765 manual 3/6/02 2:20 PM Page 1 OWNER'S MANUAL 1750/1760/1765 LASER/RADAR DETECTOR THE WHISTLER GROUP CORPORATE HEADQUARTERS 13016 N. Bentonville, AR 72712 TEL (479) 273-6012 FX (479) 273-2927 PRODUCT DEVELOPMENT CENTER 25 Industrial Ave. Chelmsford, MA 01824 TEL (978) 244-1400 FX (978) 244-1491 CUSTOMER RETURN CENTER 1201 N. Rogers, AR 72756 Consumer Relations Tel (800) 531-0004 P/N 1750/1760/1765MAN, © WHISTLER 2002 1750/1760/1765 manual 3/6/02 2:20 PM Page 3 INTRODUCTION If you have questions concerning the operation of this Whistler product please call consumer relations: Dear Whistler Owner, For many of us, a vehicle is more than just transportation. [. . . ] · Pressing and holding the power button a third time restores full illumination to the display. Engaging/Disengaging VG-2 See option select mode to turn this feature on. Within 30-60 seconds two beeps are sounded; to show alertness, the driver must press either the City or Quiet button within 3-5 seconds. If a button was not pressed within 3-5 seconds alarm sounds and the display reads: · Press Power to exit. During extended periods of vehicle operation, you should take frequent breaks. Improper reliance on the Stay Alert feature may result in vehicle damage, personal injury or death. NEVER OPERATE A VEHICLE IF YOU ARE DROWSY. 14 15 1750/1760/1765 manual 3/6/02 2:20 PM Page 19 OPERATION Option Select Mode Entering Option Select Mode allows you to customize options such as Tone Select, Compass Select, Abbreviated Power Up Sequence and VG-2 Mode. When selecting options, the , or quiet must be pressed within 20 seconds or options mode will automatically be exited. To enter: 1760/1765 Chart Press: quiet For 2 seconds *Display Reads: COMBO To Change, Press or Option: Combo=Radar & Compass Radar=No Compass Compass=No Radar Tone 1, 2, or 3 (3 different X, K, Ka patterns) X, K, Ka Audio tones 1 beep during Power Up Turns VG-2 On Turns VG-2 Off Turns Safety Radar On Turns Safety Radar Off Battery Saver On Battery Saver Off OPERATION 1750 Chart Press: Quiet For 2 seconds *Display Reads: TONE 3 To Change, Option: Press or Tone 1, 2, or 3 (3 different X, K, Ka patterns) X, K, Ka Audio tones 1 beep during Power Up Turns VG-2 On Turns VG-2 Off Turns Safety Radar On Turns Safety Radar Off Real Voice engaged Real Voice disengaged Battery Saver On Battery Saver Off 2nd time TEST YES = YES = NO = ON = OFF = ON = OFF 3rd time 4th time VG2 OFF SR ON VOICE ON B SVR 2nd time TONE 3 = YES = NO = ON = OFF = ON = OFF = ON = OFF 5th time = ON = OFF 3rd time TEST YES 6th time 4th time 5th time VG2 OFF SR ON B SVR ON = ON = OFF *Factory settings. Press Power anytime to exit. 6th time = ON = OFF 16 17 1750/1760/1765 manual 3/6/02 2:20 PM Page 21 OPERATION Teach/Tutorial Mode Provides simulated alerts for each type of signal. Display reads: Quiet mode can also be accessed while Teach/Tutorial mode is engaged. Vehicle Battery Saver Mode The Vehicle Battery Saver Mode automatically shuts off your detector within 3 hours if you forget to turn it off. The timer is reset if the detector is turned off, unplugged or any button is pressed before the 3 hours have expired. The detector will alert you with an audible and visual warning before it shuts off. Display reads: RADAR ALERTS Speed Radar Audio/Visual Alerts When X, K or Ka is detected the band ID and signal strength is displayed. Example: 1 = weak signal, 9 = strong signal Pulse Protection® When a pulse type signal (instant on strong signal) is detected an urgent 3 second audio warning is sounded and the display reads: During this warning you can reset the unit by pressing any button. If the unit has automatically turned itself off, press the Power button to turn the unit back on. You can manually engage the Vehicle Battery Saver Mode by pressing and holding the City button until one beep is heard. Refer to "Option Select Mode" for instructions for deactivating battery saver mode feature. After 3 seconds standard alert pattern continues. 18 19 1750/1760/1765 manual 3/6/02 2:20 PM Page 23 SAFETY RADAR ALERTS In communities where transmitters are located, the Safety Warning System displays over 60 text messages. Safety Warning System Text Example: Poor Road Surface: LASER/VG-2 ALERTS Laser Audio/Visual Alerts When a laser signal is detected the word "Laser" and signal strength is displayed, the audio alert is continuous for a minimum of 3 seconds. Example: The more "|||" the closer the laser source. VG-2 Audio/Visual Alerts Note: You must turn this feature on in option select mode before it will detect VG-2. When a VG-2 signal is detected, the detector "hides" its own radiated signal and becomes undetectable by the VG-2. Text message confirms detection of VG-2. Note: Not all areas have Safety Warning System transmitters. Visit the Safety warning System web page at www. safetyradar. com for SWS locations. Every 30 seconds, the detector checks for a VG-2 signal. If a VG-2 signal is still present, the unit continues to hide and repeats the VG-2 alert. [. . . ] When returning a unit for service under warranty, please follow these instructions: 1. Ship the unit in the original carton or in a suitable sturdy equivalent, fully insured, with return receipt requested, and shipping charges prepaid to: WARRANTY INFORMATION Whistler Repair Dept. 72756 IMPORTANT: Whistler will not assume responsibility for loss or damage incurred in shipping. Therefore, please ship your unit insured with return receipt requested. [. . . ]