User manual WHISTLER WMAP

[. . . ] As an expressed condition of this License, the End-User must reproduce on the copy Whistler's copyright notice and any other proprietary legends on the original copy supplied by Whistler. Transfer the Software and all rights under this License to another party together with a copy of this License and all written materials accompanying the Software, provided (i) the End-User gives Whistler written notice of the transfer (including in such notice the identity of the transferee), and (ii) the other party reads and agrees to accept the terms and conditions of this License. The End-User may NOT sublicense, assign, or distribute copies of the Software to others. The End-User may NOT decompile, reverse engineer, disassemble, or otherwise reduce the Software to a human readable form. [. . . ] From the CD-ROMs, copy the desired state folder(s) to the newly created USA folder. To include all of the 48 states on the CD's, approximately 1 GB of hard drive space is needed. You can now operate the WhistlerMapTM program with the selected states from your computer's hard drive. For any questions, please refer to the user's guide, our FAQ page on our website (www. whistlergroup. com), or contact our customer service department at 1-800-531-0004. FEATURES Features 1. WhistlerMapTM Toolbar a. File Open, Save as, Exit To open, save map files and exit the program. b. Show Clear, Show Roads, Show POI's, Display Icons, Show, Hide, Show Base To display POI's, Waypoints, routes and roads in base and detailed maps. c. Tools Arrow, Move, Zoom Out, Zoom In, Search Object, New Waypoints, Waypoints List, Routes and Metric System To display, move, zoom out, zoom in, search map information, create new Waypoints, list all Waypoints and create routes. List Add Item, Remove Item, Add Many Items To add and remove map files. e. Transfer Download, Upload To download Program (OS), Map, Presented map, Track Log, Waypoints and Routes from PC to Galileo, and Upload Track Log and Waypoints saved in Galileo to PC. f. About About WhistlerMapTM Displays WhistlerMap'sTM release version information. 1 2 OPERATION Operation The basic WhistlerMapTM download/upload functions are easy to use. The following section outlines two methods for downloading detailed mapping information. If you are familiar with Galileo functions then this program will be very easy to use. See "Viewing Detailed Maps" for viewing street details. OPERATION 3) Press and hold "PWR" to turn on the Galileo. 4) From any screen, press the "MENU" key and select the "Main Menu" option. Downloading Detailed Maps - New Files Note: Normal PC to Galileo download times average six minutes per 1MB. For faster downloads use a Compact Flash (CF) Card Reader. 5) Select the "Loading" option from the Galileo's Main menu. Follow the on screen directions (Press MENU Key) and then select the "Download Map" option. Downloading Detailed Maps- Continued Directly To GalileoTM 1) Fully insert the headphone-style plug of the download cable into the Galileo's "Data" jack on the end of the GPS where buttons are located. The other end of the USB cable connects to your computer's USB port. Data 2) Insert a Compact Flash (CF) Card into the Galileo and install four fresh or fully charged AA batteries before continuing. 6) Turn on the computer or have computer auto detect the USB port. 7) If the computer displays a dialog box to locate new drivers because it could not detect or could not find the drivers for the 3 4 OPERATION Galileo, direct the computer to the USB Driver folder on either Whistler Map CD. Open the folder corresponding to the type of OS your computer is using and click "OK". 4) From any screen, press the "MENU" key and select the "Main Menu" option. 5) Select the "Loading" option from the Galileo's Main menu. Follow the on screen directions (Press "MENU" Key) and then select the "Download Map" option. [. . . ] Edit A Route 1) This procedure allows you to rename, add or edit comments, insert or delete Waypoints in a route. 2) Select "Routes" from the "Tools" menu or select the "Routes" icon 3) A route screen is displayed. At this time you have the option to rename the route (NAME field) and/or add a comment line. ROUTES 4) To remove a waypoint, select the Waypoint to delete. Simply click on "Delete" from the "Rt_Wp" section to remove the Waypoint. 5) To add a Waypoint at the end of your route, select the new Waypoint from the "Waypoint" field and click "Add" from the "Rt_Wp" section. [. . . ]