User manual XEROX 8365

[. . . ] February 2010 701P50370 Xerox 8265/8290/8365/8390 Wide Format Color Printer User Guide ® ©2010 Xerox Corporation. Xerox, the sphere of connectivity design, and Xerox® 8265/8290/8365/8390 Wide Format Color Printer, are trademarks of Xerox Corporation in the United States and/or other counties. Changes, technical inaccuracies, and typographic errors will be corrected in subsequent editions. Document Version: February 2010 WEEE regulations Environmental information Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. [. . . ] · [F1] key: Moves one digit to the left on the setting value to be changed. · [ENTER] key: Sets the setting value, and moves the screen to the menu of the previous hierarchy. · [CANCEL] key: Cancels the setting value, and moves the screen to the menu of the previous hierarchy. Refer to `Network setting menu' 4. 3. 3. 7 Gateway Menu The product sets the IP address of the connected gateway. Setup items Gateway Parameters <000. 000. 000. 000> 223. 255. 255. 254 Description Use the following keys to change the IP address. · [F1] key: Moves one digit to the left on the setting value to be changed. · [ENTER] key: to confirm the setup value · [CANCEL] key: to cancel the setup value 66 8265/8290/8365/8390 User Guide 4 Printer Operation 4. 3. 4 Setup Menu 4/7 4. 3. 4. 1 Utility menu Perform various settings for application functions of products. *Utility* ErrorDisp. OnCleaning MediaWidth (1/3) *Utility* SlantCh. RemPanel (3/3) Setup items Utility (1/3) Parameters ErrorDisplay MediaDet. OnCleaning MediaWidth Utility (2/3) Prn+Wipe SmartTop AutoClean Utility (3/3) Utility (1/3 ­ 3/3) CapCycle SlantCh. RemPanel - Description To set display method to the operation panel when minor error occurred. When media has been initialized, to perform detection of width and front edge of the media. Cleaning should be performed automatically when the power is turned on. If media detection is not performed for initial media, to set the width of the media in the tray. To wipe while printing, to take care of possible condensation on the print head nozzle plate. This area of paper is fed before a print starts to obtain perfect quality. · [CANCEL] key: To shift to the previous hierarchy menu. 8265/8290/8365/8390 User Guide 67 4 Printer Operation 4. 3. 4. 2 ErrorDisp. Menu To set display method to the operation panel when minor error occurred. Setup items ErrorDisp. Parameters Off On - Description No ErrorDisplay. Menu To perform detection of width and edge of the media, when media has been initialized Setup items PaperDet. Parameters Normal OFF TakeUpRoll RollFeed - Description To perform media detection automatically. Should be selected when using the winding system and media is most right loaded. Should be selected when using the winding system and media is centre loaded · [CANCEL] key: to shift to the previous hierarchy menu. Notes The default setting is `RollFeed' as a result of the standard unwinder / winder 100 with your unit. When setting "Take-up Mechanism" on the Media Detection menu, the following limits are applied to the operation of the product. o The media cannot be moved forward or backward from the Origin Setting menu. o The settings in the Media Cut menu are disabled, and the settings are changed to "Off". [. . . ] It should be performed whenever the printing environment or the media type is changed. Step 1 : Step 2 : Power ON the printer and setup the media at the control panel. At the control panel, navigate to Setup Menu 1/7 and select F3 TestPrint > F4 Adj. There may be a slight delay between the time that the Bi-D Test Print is selected and the time that it actually prints. Step 3 : Analyze the Bi-D Test Print. Beginning with Print Head 1A, observe the Adjustment Lines in relation to the Reference Lines. [. . . ]