User manual XEROX DOCUPRINT 65 PRODUCTION CARTA DO CLIENTE

[. . . ] The Document Centre ST model includes an implementation of LZW licensed under U. S. Product names used in this guide may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. This document contains images of screens that were created using Zinc Application Framework software version 3. 5 © January 1997 Zinc Software Inc. As an ENERGY STAR® partner, Xerox Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. [. . . ] Using the touch panel keys, enter the name of the workgroup in which you want the printer to appear, then press Save. Press the SMB Host Name button, using the touch panel keys and enter the desired text for this item, then press Save. d) OPTIONAL STEP: Press the SMB Host Description button, enter the desired text then press Save. Press Save again to return to the previous screen. Assign a Printer Name and Description a) Press the Printer Description button. b) Press the Printer Name button. Using the touch panel keys, enter the desired text for this item then press Save. c) OPTIONAL STEP: Press the Printer Description button, using the touch panel keys, enter the desired text for this item then press Save. d) Press the Connections button. Xerox Document Centre Network Installation & Troubleshooting Guide Page 13 - 3 OS/2 (NetBEUI) OS/2 (NetBEUI) Networks Networks You will be returned to the previous screen; press the Workgroup and Host button. e) f) Set Maximum Connections and Timeout. Touch the Maximum Connections soft button on the touch screen and on the keypad enter the desired maximum connection number between 1 and 30. It is recommended that this value should be set at the default. g) Touch the Connection Timeout soft button on the Touch Screen. The printer will store the settings you have made. Prepare for print driver installation a) From the documentation package supplied with your printer, retrieve the CentreWare Network Services CDROM and the document entitled CentreWare Network Services Guide. Proceed to the next section of this procedure called Go to a Workstation and. . . Page 13 - 4 Xerox Document Centre Network Installation & Troubleshooting Guide Go to the workstations and. . . 1. Perform an OS2 Warp (4. 0) Selective Install a) Install Both NetBIOS (NetBEUI) and NetBIOS for IP during the install process. b) Select and Enable all of the file and print sharing options during the Selective Install process. Create a shared resource and connect it to the network device a) Double-click on the Connections Icon. b) Click on the + symbol next to Network. c) From the documentation package supplied with your printer, retrieve the CentreWare Network Services CDROM and the document entitled CentreWare Network Services Guide. Proceed to the next section of this procedure called Go to a Workstation and. . . Xerox Document Centre Network Installation & Troubleshooting Guide Page 14 - 3 Macintosh Networks (AppleTalk) 5. Exit the Tools Menu. Macintosh Networks (AppleTalk) a) You will be returned to the previous screen. Use the CentreWare Network Services CD-ROM to install print drivers and the Macintosh PUtility on the workstation. Details for this are found in the document supplied with your printer entitled CentreWare Network Services Guide Send a test job to the printer from an application program Check your test job for quality and use the Problem Solving section of the Document Centre Reference Guide for resolving print defects If your job did not print see the Troubleshooting section in this document to correct the problem 2. 3. 4. Page 14 - 4 Xerox Document Centre Network Installation & Troubleshooting Guide Banyan VINES Network Banyan VINES Network To enable 100BaseT or a Token Ring interface, refer to Chapter 2 How to Connect to Ethernet or Token Ring Networks to configure the Speed and Source Routing settings for your environment. Go to the printer and. . . 1. Connect your Document Centre to the network with the appropriate cabling Enter the Tools pathway a) Press the Access ( ) button. b) On the keypad enter 1111 or the current password. c) The Touch Screen will be used for the remainder of the data entry. Xerox Document Centre Network Installation & Troubleshooting Guide Page 15 - 1 Banyan VINES Network 3. Enable Banyan VINES printing a) Press the Connectivity and Network Setup button. b) At the next screen, press the Network Setup button. c) At the next screen, press the Banyan VINES button. d) At the next screen, press the Protocol button. At the next screen, press the Enable button to start the Banyan Vines protocol and press Save. Configure User Name settings and Password a) At the next screen, press the Settings button. b) At the next screen, press the User Name/PC Print Destination button, enter the desired text for this item using the touch panel keys, then press Save. Enter the desired text for this item using the touch panel keys, then press Save. d) Press the Print Service Name button. Enter the desired text for this item using the touch panel keys, then press Save. [. . . ] If the receiving node responds with a clear to send signal, transmission begins. Page 22 - 2 Xerox Document Centre Network Installation & Troubleshooting Guide CSMA/CD (Carrier Sense Multiple Access/Collision Detection) DB-9 Network access method in which nodes contend for the right to send data. If two or more nodes attempt to transmit at the same time, they abort their transmission until a random time period of microseconds has transpired and then attempt to re-send. A standardized connector with 9 pins for Token Ring and serial connections. A TCP/IP protocol for discovering and maintaining network resource information distributed among different servers. [. . . ]