User manual XEROX DOCUPRINT C6

[. . . ] The Document Company ;(52; DocuPrint C6 Inkjet Printer Xerox Corporation ©1999 by Xerox Corporation. Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or judicial law or hereinafter granted. Xerox and all Xerox products mentioned in this publication are trademarks of Xerox Corporation. XEROX The Document Company, the stylized X and all Xerox product names are trademarks of XEROX CORPORATION. [. . . ] Click on the check box to print a black border around each condensed image. The icon will reflect the border choice. Print borders 28 <Defaults> This button will return controls on the Page Layout property page to their factory defaults. Mirror Image In the center of the Page Layout property page, is an icon and check box for Mirror Image. This setting is automatically selected when you choose Paper type: Ironon transfer from the Paper/Output property page. The icon to the left of the check box is updated based on your selection. None If you select None under Layout options, rather than selecting Poster or Multiple-Up, the pages are printed exactly as they come in from the application. 29 The Image Quality Property Page The Image Quality property page provides a large graphic that estimates how Lighten/Darken, Contrast, and Saturation of Red, Green, and Blue affect the document. (However, the graphic does not change when you select ImageFixTM. ) 30 These are the Image Quality property page features: Halftone type This field is informational only. The software selects the halftone based on the quality mode and print mode selected on the Paper/Output property page. The icon to the left of the field is updated to reflect the type of halftone in use. Refer to the Printer Driver Online Help for definitions of these halftone types: · · · Fine dither Quality airbrush Sharp airbrush Lighten/Darken Increasing the value of Lighten/Darken creates a lighter print; decreasing the value creates a darker print. Contrast Increasing the value increases the amount of contrast between the light and dark colors in your print. This control is disabled when Print document as is set to Greyscale. Saturation 31 Red Move the Red scrollbar to the left or right to decrease or increase the amount of red in your print. Move the Green scrollbar to the left or right to decrease or increase the amount of green in your print. Move the Blue scrollbar to the left or right to decrease or increase the amount of blue in your print. Sets the controls on the Image Quality property page to their factory defaults. Green Blue Defaults 32 The About Property Page This tab gives important information concerning the version of the software and copyright dates. If you need assistance, please have your software version number available for the Xerox Customer Support Center when you call or e-mail. 33 The Status Property Page The Status property page provides you with printer status information, including the level of ink in the print cartridge(s). The Status property page also shows the progress of the current print job. By default, the Status property page opens automatically while printing a document. 34 If the printer is idle, you can check its status by clicking the <Start> button, pointing to Settings, and clicking Printers. With the left mouse button, click Show Status window (Windows 95/98 only). These are the Status property page features and settings: Information area This area is at the top of the screen and consists of a printer icon and a message area. The text in the message area reports low ink, out of ink, out of paper, wrong print head, etc. , as well as information to remedy the problem. This image shows the currently installed print cartridge and the levels of ink in the cartridges. If one of the individual ink cartridges is low, a warning symbol appears on the mimic (a mini yellow triangle with an exclamation point). [. . . ] Note: Do not ship the power cord, printer cable, printer driver disks, user guide, or print head and ink cartridges unless instructed to do so. Close the printer cover and remove the paper output shelf and the paper input shelf. If you have the original box, use the original packing material and go to step 10. Completely wrap the printer in two layers of bubble wrap (minimum thickness of 12. 3 mm or 5") and tape the bubble wrap to keep it in place. [. . . ]