User manual XEROX PHASER 6130

[. . . ] Phaser® 6130 printer User Guide Guide d'utilisation Guida dell'utente Benutzerhandbuch Guía del usuario Guia do Usuário Gebruikershandleiding Användarhandbok Betjeningsvejledning www. xerox. com/support Unpublished rights reserved under the copyright laws of the United States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation. Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc. XEROX®, CentreWare®, Phaser®, PrintingScout®, and Walk-Up® are trademarks of Xerox Corporation in the United States and/ or other countries. [. . . ] For Windows 2000 or later, an administrator's password only allows users with administrator rights to change the settings. Users without the rights of administrator can only check the contents. When configuring the Custom Paper Size dialog box in Windows 2000 or later, settings of other printers on the computer will also be affected as the form data base of the computer is used by a local printer. For a shared printer on the network, settings of other shared printers on the same network in another computer will also be affected as the form data base on the server with existing print queue is used. From the Start menu, click Printers and Faxes, and then display the properties of the printer to be used. Use the Details list box to select the custom setup you want to define. You can specify the values either by entering them directly or using the Up Arrow and Down Arrow buttons. The length of the short edge cannot be longer than the long edge, even if it is within the specified range. The length of the long edge cannot be shorter than the short edge, even if it is within the specified range. Phaser® 6130 Printer 4-31 Printing Custom Size 6. To assign a paper name, select the Name Paper Size check box, and then enter the name in Paper Name. Click OK twice. Using the PostScript Driver On the PostScript print driver, set the custom size in the Custom Paper Size dialog box. From the Start menu, select Settings, click Printers and Faxes, and then display the properties of the printer to be used. You can specify the values either by entering them directly or using the Up Arrow and Down Arrow buttons. The length of the short edge cannot be longer than the long edge, even if it is within the specified range. The length of the long edge cannot be shorter than the short edge, even if it is within the specified range. Click OK. Printing on Custom Size Paper Use the following procedures to print using either the PCL or PostScript drivers. Using the PCL Driver The procedure to print on custom size paper using the PCL print driver is as follows. Note: The way to display the printer Properties dialog box differs according to the application software. From Output Size, Fit to New Paper Size defaults to Same As Paper Size. Click Print in the Print dialog box to start printing. Phaser® 6130 Printer 4-32 Printing Custom Size Using the PostScript Driver The procedure to print on custom size paper using the PostScript print driver is as follows. You can specify the values either by entering them directly or using the Up Arrow and Down Arrow buttons. The length of the short edge cannot be longer than the long edge, even if it is within the specified range. The length of the long edge cannot be shorter than the short edge, even if it is within the specified range. [. . . ] This command can only be used when the full access password is specified by the #Password command. Example of Commands 1. When the read only password is "ronly", and to check the printer status: #Password ronly #Status 2. When the full access password is "admin", and to set the recipient e-mail address to "service@xerox. com": #Password admin #SetMsgAddr service@xerox. com 3. When the full access password is "admin", and to set the recipient e-mail address to "service@xerox. com", then confirm the setting result on the network settings list: #Password admin #SetMsgAddr service@xerox. com #NetworkInfo Note: Describe the "#SetMsgAddr" command before the "#NetworkInfo" command. [. . . ]