User manual XEROX WORKCENTRE 7335

[. . . ] Xerox®, The Document Company®, the digital X® and all Xerox products mentioned in this publication are trademarks of Xerox Corporation. Product names and trademarks of other companies are hereby acknowledged. Pause PC Use to pause a print job Printing Reports 2-Sided Copy Output Reduce/ Enlarge Lighten/ Darken Paper Supply Use to display a list of available reports for printing Use to make one or two-sided copies Use to collate outputs in copy mode Use to reduce or enlarge the image Use to adjust image contrast level Use to select the required paper supply source Speed Dial Use to enter a 2 digit Speed Dial number which has been stored in the machine's phone book memory Pause/ Redial Numeric Keypad Start Stop Clear/ Clear All Machine Graphic Use to redial the last phone number called or to add a pause Use to enter characters, or to choose special functions in conjunction with the Menu button Use to start a job Use to stop an operation Use to clear selections and entries Illuminates when a system error occurs If required, connect your answering machine and/or telephone to the EXT jack and connect the telephone line cord from the wall jack to the LINE jack. CAUTION: Pull the scan unlock switch toward you to unlock the scanner before connecting the power. [. . . ] Follow the instructions in the User Guide for proper cleaning methods. Never use supplies or cleaning materials for purposes other than those for which they were intended. The product may fall, causing personal injury or serious damage to the product Slots and Openings in the cabinet and in the back and sides of the product are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. The product should never be located near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided. Never push objects of any kind into the slots of the product as they may touch dangerous voltage points or short out parts which could result in a fire or electric shock. Never remove covers or guards that require a tool for removal, unless directed to do so in a Xerox approved maintenance kit. Covers, guards and interlock switches are provided to ensure that the machine will not operate with covers opened. Do not put your hands into the fuser area, located just inside the exit tray area, as you may be burned. quality Standards: The product is manufactured under a registered ISO9002 Quality system. All Xerox equipment has been designed to exacting safety standards and has undergone a variety of stringent safety tests including earth bond, insulation resistance and electrical strength tests. Xerox Limited manufacturing plants have been awarded ISO 9000 quality certification and are subject to regular audits by the British Standards Institution or equivalent national standards body. Xerox equipment which has been properly and regularly serviced and maintained should not have to undergo additional specific safety tests pursuant to the 1989 Regulation. Customers wishing to complete safety testing should contact Xerox Limited Technical Centre (see page B22) for advice prior to any test implementation. XEROX equipment should, however, be properly and regularly serviced and maintained at all times. This 1989 Regulation places a duty on all employers and self-employed persons to ensure the electrical systems in their premises are constructed, maintained and operated in such a manner as to prevent, so far as reasonably practicable, danger. This includes ensuring that all electrical products connected to such electrical systems are safely constructed, maintained and operated. qUESTION: Does XEROX Limited comply with the Electricity at Work Regulation?ANSWER: The regulation places a duty on all employers and self-employed persons to ensure the electrical systems in their premises are, effectively safe. The regulation does not impose on, amongst others, manufacturers or suppliers of such electrical systems. However, rest assured that all XEROX equipment which XEROX Limited and its authorized distributors supplies to customers, conforms with all the relevant safety legislation and standards. [. . . ] Use the standard line cord (with modular plugs) provided with the installation kit to connect it. An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. Repairs to the machine should be made only by a Xerox representative or an authorized Xerox service agency. [. . . ]