User manual XEROX WORKCENTRE PRO 423

[. . . ] 1 Navigating Display Screens Navigating Display Screens 1 2 3 4 1. Use the Select buttons to select items on the display and to scroll through menus. Use the Right Arrow and Left Arrow buttons to navigate screens or to move from one entry field to another. [. . . ] Use the Enter button to accept the currently selected item on the display. Use the Exit button to return to the previous display screen. Network Setup Using DHCP When the machine starts up after power on, it automatically uses DHCP to obtain its network configuration information. A DHCP server delivers an IP address as well as other configuration settings to the machine. After the machine starts up, it negotiates with the DHCP server for an IP address. Wait two minutes for the network setup to complete, and then print the System Settings List: a. User the Select button below the display to highlight Report/List, and then press the Enter button. Press the Select button until you see System Settings on the display, and then press the Enter button. Press the Select button until you see Subnet Mask on the display, , and then press the Enter button. Use the numeric key pad to enter the first number of the subnet mask, and then press the Right Arrow button to move to the next field. See Verifying Network Setup Using CentreWare Internet Services (CentreWare IS) on page 4. Verifying Network Setup Using CentreWare Internet Services (CentreWare IS) CentreWare IS provides a simple interface that enables you to manage, configure, and monitor networked printers from your desktop using an embedded web server. CentreWare IS gives administrators easy access to printer status, configuration, and diagnostic functions. It also provides users with access to printer status and special printing functions such as printing saved jobs. With CentreWare IS software, you can access and manage your printers over a TCP/IP network using a web browser. Note To enter network configuration settings via CentreWare IS, your computer must be on the same subnet as the Xerox WorkCentre M118/M118i. [. . . ] With CentreWare IS software, you can access and manage your printers over a TCP/IP network using a web browser. Note To enter network configuration settings via CentreWare IS, your computer must be on the same subnet as the Xerox WorkCentre M118/M118i. For additional information about using CentreWare IS, see the User Guide and the System Administration Guide. [. . . ]